The monsoon season can be quite devastating in Arizona, bringing about extreme temperatures, strong winds, increased humidity, and heavy rainfall. This creates the need for pool owners to know what should be done for the pool to remain usable and of great condition. After a monsoon season, extra pool maintenance is required. Additionally, a thorough inspection by a swimming pool service near me is crucial to assess the state of the pool and take preventative measures.
The following measures are helpful in pool maintenance after a monsoon.
Removal of dirt and debris.
Monsoon season is accompanied by a lot of dirt and debris which end up in your pool. The presence of debris and dirt in the pool can cause much damage to your filtration system. After a monsoon, the first step towards cleaning your pool is skimming debris on the surface, followed by brushing or vacuuming the bottom of the pool. If there is too much dirt that either method cannot remove, it is necessary to seek professional help.
It is advisable to check the filters’ condition by dissembling them and backwashing, which also ensures that the filters are clean. In case the filters are damaged, it is best to have them replaced.
During a monsoon season, it is advisable to adjust your filtration system to run for longer during peak monsoon hours. It is a proactive measure in reducing dirt and debris in the pool and also aids in maintaining clean pool water. It is worth noting that debris and dirt lower water quality and is also a health hazard.
Check skimmer baskets and pump baskets.
Skimmer baskets and pump baskets fill up quickly after a monsoon. It is vital to ensure they are emptied to avoid clogging. Besides, it helps the pool filter and the pump work efficiently. Clogging of skimmer baskets and pump baskets results in a limited flow of water to the pump, making it to overheat and burn out.
Check water levels.
After a monsoon, the water level in the pool is likely to increase due to heavy rainfall. It is necessary to ensure you drain excess water to adjust the water level back to normal. On the other hand, if the water level in the pool is low, it could result in the filter and pump damage; it is significant to refill the pool to the normal level.
Maintaining proper water levels is important in circulation and filtration of water through the pool system. It is worth noting that draining your pool to fill it up with clean water is highly discouraged. It is only advisable to clean the water available in the pool, however dirty it may be.
pH maintenance.
It is crucial to ascertain the pH level of your pool after a monsoon. Heavy rainfall and dirt experienced during the monsoon season have a lot of impact on your pool’s pH level.
Determining how to balance pH in pool helps maintain water quality and ensures one is not exposed to harsh chemicals, thus enhancing safety.
Shock your pool.
Many people are prompted to shock their pool once the pool water appears to be hazy and cloudy or notice algae’s presence. Extreme weather conditions experienced during the monsoon season carry a lot of debris, dirt, and algae spores.
Due to heavy rainfall, it is possible to have low chlorine levels after a monsoon hence creating the need to shock your pool. Adding a shock booster to your pool ensures your pool is thoroughly sanitized. The process entails super-chlorinating to kill chloramines.
It is suitable to shock your pool a day after the monsoon occurs, most preferably at night. After a pool shock, it is essential to do a pH test to ensure it is well adjusted.
Maintaining a pool can be stressful as it requires a lot of commitment, which is time-consuming. Getting professional pool service after monsoon is ideal for extra pool maintenance. pH Balanced Pool Service has the professional expertise, experience, and technology to provide exceptional pool service that guarantees you excellent pool condition all year long. They are efficient, reliable, available, and affordable when it comes to pool service.
Pool toys are an essential item to any backyard swimming pool, especially when there’s children involved. They make playing adult swimming pool games such as basketball and volleyball fun and keep your children entertained for hours. The downside, pool toys can accumulate with grime, mold, and mildew over time if not properly cleaned and disinfected on a regular basis.
Below are four useful tips from pool service Gilbert companies on how to keep your pool toys clean and safe for use:
Tip #1: Disinfecting & Sanitizing Your Toys
Top start with, for proper disinfection and cleaning, you should be using the right cleaning tools. While chlorinating a swimming pool kills most germs and bacteria, your pool toys can still become covered in algae. Although chlorine can sanitize your toys, they still need to be dried to prevent mold and mildew from forming.
Tip #2: Removing Mold and Mildew
To remove mold and mildew from your pool toys, you can use a diluted bleach solution. This solution should be mixed with two cups of bleach for every gallon of water. Spray it all over your toys and scrub vigorously with a soft-bristle brush to remove lingering grime and debris. Then, rinse your toys down with a garden hose and dry them off with a towel before putting them away.
Tip #3: Natural Home Cleaning Solutions
If you’re not fond of harsh chemicals, you can definitely use more natural remedies such as a baking soda solution or white vinegar solution. For white vinegar, use a ratio of 1-part vinegar to 2-parts water. If you want to try a baking soda solution, use a ratio of 1/4 cup baking soda to one quart of water. Rinse and repeat the same steps as mentioned above.
Tip #4: Storing Your Pool Toys
One common mistake besides pool equipment cleaning that many pool toy owners make is storing their toys improperly. This is the primary reasons why reason mold and mildew form on pool toys. Once you’re done using the toys,place them in the proper place to dry. Mold and mildew thrives in damp, dark places; therefore, when you don’t dry your pool toys properly, they are at risk of developing a number of infectious bacterias. Instead, store your toys in a dry, airy location, and make sure to dry them thoroughly before storage.
The Quality of Your Pool Toys Could be Affected by the State of Your Pool
If you want to make playtime as safe as it possibly can be? Your pool toys might be getting indirectly affected by the state of your pool instead of improper cleaning. If you have ever experienced a slimy feeling on a porous noodle toy? That could be caused either by having a non-chlorinated pool or by having a pool with a skewed PH balance that doesn’t let chlorine work effectively.
An ideal pool PH balance should be from 7.2 – 7.8 or slightly alkaline. Any higher, and your chlorine stops working as it should and any lower, your pool tiles will start to corrode. You can try to manually balance PH levels by adding stabilizers to your pool. However, a better option would be to hire a professional pool cleaner.
Why Should You Hire Professional Pool Cleaners?
Professionals such as pH Balanced Pool services can keep your pool pristine by ensuring that the PH levels are always perfectly balanced. Additionally, we provide tile cleaning, filter cleaning, and general pool repairs. You’ll never have to worry about the condition of your pool or your pool toys ever again when you choose the best swimming pool service in Arizona.
Having a pool is a great pastime. It allows you to host friends and family over for memorable parties and get-togethers. Yet owning a pool means you’re going to have to take care of it. A lot. One problem that pool owners may notice is stains. Depending on what kind of stain it is, it may be easily removed or it may require help from the swimming pool service Gilbert AZ professionals. Here’s a helpful guide to pool stains and how to remove them.
What Kind of Stain is it?
The first step that should be taken in removing pool stains is determining what kind of stain it is. There are three main types of pool stains: Organic, metal, and rust.
Organic stains come from organic materials. This might be from a build-up of algae in your pool. It could also come from leaves and grass that have flown into the pool from an outside source. It may even be due to berries and other flowers that have drifted into the water. The organic material should be cleaned out of your pool frequently.
Metal stains typically come from the water source. The water may contain iron, copper, or manganese. Depending on the metal, the stain may be different colors. These metals can also be introduced to the pool via fertilizer sprays that drift into the pool or yard sprays. When spraying your yard with either, it’s good practice to cover your pool to prevent contamination. It’s also possible that swimmers may have some chemicals on their feet when they walk across the yard to the pool. You may want to implement a sandal rule where swimmers must wear sandals when outside of the pool.
Rust stains can be particularly unpleasant to look at in your pool. They can come from a metallic object that falls into the water and remains there. An example might be a hairpin that fell out of a swimmer’s hair and landed on the bottom of the pool. Over time, the hairpin starts to rust and turns a nasty brownish-red color in the entire area. Rust stains can also come from the rebar. In this instance, it’s best that a professional Gilbert pool service cleans the issue since it may require construction.
One final stain that you may notice is waterline stains. These can come from many different sources. Oil and lotions that are on a swimmer’s skin can cause the stains. As can powerful chlorine tablets. Finally, swimmers who have a tendency to relieve themselves in the pool can also create a stain along the waterline.
Removal Practices
After you have determined what kind of stain it is, you stand a better chance of removing it effectively. One method is to shock it. This method requires you to know the pH of your pool. It should have a pH between 7.0-7.2. Begin by reducing the pH and the alkaline levels.
Then add a few pounds of calcium hypochlorite to the water. The general rule of thumb is to add a bag to every five gallons of water. After a few hours have passed, you can sprinkle some more chlorine granules into the stain directly. Using a brush, scrub the stain until it is removed. You can then return the pool back to its preferred alkalinity by adding sodium bicarbonate into the water.
Another option is to buy an enzyme that can eat away organic material stains. You simply add the enzyme to the water per the manufacturer’s description.
For stains that stem from metallic sources, like metal in the water, you can clean all you want. However, until the source of water is altered, you will continue to see stains. The best option in this regard is to include a filter that can remove the metals before the water is poured into the pool. Then you can clean it using the method described above.
Rust stains can also be prevented by ensuring that no one swims in the pool with metal.
Choose a Professional Cleaner
For the best chance of having a clean and safe pool, you should just hire Ph Balanced Pool. They’ll take care of your pool and its pH levels, so you can just enjoy a beautiful pool.
Your pool sees a lot of action in the summer. If you want to keep your pool open and ready for all of the parties you have planned, then you need to take care of it. Here are a few ways that you can keep your pool clean during the summer.
Understand Pool Chemistry
Unfortunately, cleaning your pool isn’t as simple as just tossing in some chlorine tablets whenever you want. To keep it absolutely clean, you have to understand how pool chemistry works. Unless you have a kit at home that can test the chemicals in your pool as well as its pH, this is best suited for the pool service professionals.
You can simply take a sample of your pool’s water and send it to a professional pool cleaning company. They can go over the sample and tell you what you should add to your pool over time.
It’s good to know that the pH of your pool’s water should be around 7. This is because anything higher than that will make chlorine treatments less effective.
Clean Out Filter
Your pool filter is going to do a lot of work in keeping your pool clean. However, it also needs to be cleaned out now and then. You can do this by easily removing the filter and cleaning it with a brush and hose. In some cases, it may be a good idea to toss out the old filter and put in a new one.
You’ll want to clean your filter after thunderstorms and when there’s a lot of pollen in the air. Your filter can become choked due to all of the debris clogging its system.
Check Water Level
It’s also important that the water level stays at an optimal height. If the water level is too low, then it won’t be able to reach the filter and skimmer. Keep the pool filled to just above the filter to ensure water can easily pass through it.
Inspect the Ozonator
To keep chlorine levels in your pool at a good amount, you need to ensure that your Ozonator is working properly. First, check to see if the light is on. If not, then you’re going to need professional Gilbert pool companies to repair it. If it is, then feel free to clean out any debris that might be blocking it. Ozonators help reduce chlorine waste. It’s important to keep them operating efficiently to stop your pool from becoming too chlorinated.
Maintain Chlorine Generator
Those who have salt pools have to be especially mindful of their chlorine generator. Because they’re using salt to help keep their pool water clean, it also interferes with the chlorine generator. Regularly check your water’s pH to ensure that it stays around 7. In most cases, you’ll find that you can actually taste the salt in the water. This isn’t good. Reduce the amount of salt that is being placed inside of the pool to keep your chlorine generator healthy and efficient.
Clean Out Bottom Drains
Even though you may not be using your drain for a while yet, you still need to keep it clean. Bottom drains can start to collect algae if they’re not regularly cleaned. That algae can then start to expand across the pool and turn it green if you don’t quickly clean and chlorinate the water.
Hire a Professional
The best way to keep your pool absolutely clean this summer is to hire Ph Balanced Pool. Sit back and relax while they test your pool and correct its pH for you. With their service, you can simply enjoy the pool and not worry.
Water loss is one of the most damaging issues a pool can face. Whether it be equipment malfunctions or sub-standard water circulation, preventing water loss should be at the forefront of every pool owners mind. Believe it or not, low pool water levels can actually cause a fire hazard. If your pool pump begins to accumulate air in its system through low water levels, it can catch fire and correspondingly burn out. This is an expensive malfunction and almost always requires a complete overhaul of your pump motor. One of the easiest ways to prevent pool water loss is to check your water levels multiple times a week, as well as regular pool maintenance provided by a professional Gilbert pool service company.
Water loss can occur year-round, even in the fall and winter. In those months especially, water loss generally occurs due to debris accumulation on your pool cover. The weight of the debris sinks your pool cover into the water causing water to overflow on the sides. Additionally, pool heaters can also cause water loss through evaporation. As your heater runs for hours on end, your pool continually loses water as steam is created. Evaporation is a common occurance in a dry state like Arizona. Humid states such as Texas and Florida will suffer less from water loss in the pool.
At the end of the day, the absolute best way to prevent water loss in your pool is to schedule a regular pool maintenance. You can also make sure your pool cover properly fits your pool and clean any and all debris off your cover once spotted. If you find that water loss is occurring at an alarming rate, you may be suffering from a leak. Once discovered, it is absolutely recommended that you reach out to your local pool maintenance company for further assistance.
What ways can you keep your pool clean? The best pool service in Gilbert wants to share some advice that can keep your pool water sparkling fresh, and usable at all times. With these tips, you can keep your pool water clean during any season.
Why Swimming Pool Water Cleaning is Important
A swimming pool is a place for relaxation, fun, and entertainment. By taking care of the pool, it helps people to enjoy its benefits for many years to come. Since the dirt and debris build up quickly inside and around the swimming pool area, it needs to be cleaned thoroughly to prevent many water-borne diseases from spreading.
A dirty pool is definitely not a place to host pool parties. It not only leaves a negative impression but also causes skin irritations to the swimmers. However, professional cleaning helps to keep the pool intact for years. It makes the equipment durable and keeps the swimmers safe in it.
Constantly Clean Your Pool Screen/Cover
Nature has a tendency to accumulate on the top of pool screens and/or covers, as well as around the pool deck itself. Using typically household equipment such as a leaf blower or rake is a great way to keep your pool area spotless.
Toss a Tennis Ball in the Pool
Surprisingly enough, throwing a tennis ball into the pool is a great way to keep it clean. Tennis balls have been known to absorb excess oils from sunscreen, which can easily develop into a dirty pool. There isn’t a timetable that the tennis ball should be in your pool. Simply toss one in between uses and remove it when wanting to use. Enzyme cleaners are also available to help eliminate various chemical buildups in the pool.
Pay Special Attention to Tile Line
A lot of the time folks believe they are cleaning their pool effectively without a pool cleaning Gilbert AZ, but many times you’ll still see residual tile line stains in pools. Due to the fact that dirt and grime is able to float on the top of the water, it is suggested that you clean your pool tile multiple times a month. Make sure to also clean around the pool to prevent pool water being tracked in through feet.
Always Be Aware of Your Pets
If you do have pets yourself, you’ll need to be extra vigilant to keep your pool clean, as pet hair will make the water dirty in a hurry. Additionally, this also means that you’ll need to check the pumps/filters quite often as well.
Keep Bugs Out
Dead bugs floating on the surface of your pool are never an appealing sight to pool users anywhere. Lemongrass is a good preventative measure to take against bugs in and around the pool. If you find yourself unable to acquire some Lemongrass, dryer sheets have also been known to repel bugs as well. Regardless, take the necessary preventative steps to assure that your family and friends can swim in a clean pool all summer long!
Monsoon season is accompanied by a lot of dirt and debris which end up in your pool. The presence of debris and dirt in the pool can cause much damage to your filtration system. After a monsoon, the first step towards cleaning your pool is skimming debris on the surface, followed by brushing or vacuuming the bottom of the pool. If there is too much dirt that either method cannot remove, it is necessary to seek professional help.
After a monsoon, the water level in the pool is likely to increase due to heavy rainfall. It is necessary to ensure you drain excess water to adjust the water level back to normal. On the other hand, if the water level in the pool is low, it could result in the filter and pump damage; it is significant to refill the pool to the normal level.
Many people are prompted to shock their pool once the pool water appears to be hazy and cloudy or notice algae’s presence. Extreme weather conditions experienced during the monsoon season carry a lot of debris, dirt, and algae spores.
Top start with, for proper disinfection and cleaning, you should be using the right cleaning tools. While chlorinating a swimming pool kills most germs and bacteria, your pool toys can still become covered in algae. Although chlorine can sanitize your toys, they still need to be dried to prevent mold and mildew from forming.
One common mistake besides 
The first step that should be taken in removing pool stains is determining what kind of stain it is. There are three main types of pool stains: Organic, metal, and rust.
After you have determined what kind of stain it is, you stand a better chance of removing it effectively. One method is to shock it. This method requires you to know the pH of your pool. 
Unfortunately, cleaning your pool isn’t as simple as just tossing in some chlorine tablets whenever you want. To keep it absolutely clean, you have to understand how pool chemistry works. Unless you have a kit at home that can test the chemicals in your pool as well as its pH, this is best suited for the 
To keep chlorine levels in your pool at a good amount, you need to ensure that your Ozonator is working properly. First, check to see if the light is on. If not, then you’re going to need professional 
Even though you may not be using your drain for a while yet, you still need to keep it clean. Bottom drains can start to collect algae if they’re not regularly cleaned. That algae can then start to expand across the pool and turn it green if you don’t quickly clean and chlorinate the water.
Water loss can occur year-round, even in the fall and winter. In those months especially, water loss generally occurs due to debris accumulation on your pool cover. The weight of the debris sinks your pool cover into the water causing water to overflow on the sides. Additionally, pool heaters can also cause water loss through evaporation. As your heater runs for hours on end, your pool continually loses water as steam is created. Evaporation is a common occurance in a 
Toss a Tennis Ball in the Pool
