Cooling yourself off on a very hot summer day is the primary perk of owning a swimming pool. However, in states like Arizona, the summer heat can quickly increase your pool temperature which further ruins all of the fun. Ideally, people prefer their water temperature between 80 to 90 degrees. Anything below or above that is considered uncomfortable by most pool owners.
Although during the summer months, pool water temperature tends to hike up quickly but there are still ways to cool down your pool. This includes adding water features, keeping your pool clean in the summer, shading the pool, using reversible heat pumps and evaporative coolers, etc.
Swimming pool maintenance is an important part to enjoy the pool at its best. Let’s continue to read and discuss seven tips provided by our pool cleaning experts for keeping your pool clean in the summer.
7 Tips for Keeping Your Pool Clean in the Summer
Pool maintenance Gilbert, AZ services are important, and according to the Pool Man, it’s always important to keep your pool clean, especially in the summer to enjoy uninterrupted and safe swimming in your pool. There are a lot of pool cleaning ideas you can find online but always make sure it comes from a trusted source.
Here are the seven best tips for keeping your pool clean and cool in the summer under the intense Arizona sun:
Tip #1: Vacuum Debris & Dirt
When you keep your pool surface clean, it prevents you and your family members from getting any infections. Vacuuming the pool is an instant and efficient way to remove algae, debris, and dirt. Our professionals at pool maintenance Gilbert, AZ services recommend keeping your pool clean with a weekly pool service.
Tip #2: Clean the Pool Filter
Cleaning the pool filter is an important part of the pool maintenance process. There are a few warning signs that indicate when it is time to clean these filters. This includes clogged drains, pool odor, etc. Depending on these signs and the type of filter you use, it is important to clean the filters with professionals like Gilbert pool repairs.
Tip #3: Maintain a Perfect Water Level
If the pool water level drops or rises, it can literally throw off the primary chemical balance in the pool which is a crucial part of maintaining a cleaned pool. Otherwise, it could cause the water filters or skimmers to have a hard time cleaning the pool. Therefore, it is important to maintain a perfect water level at all times.
Tip #4: Balance Pool Water Chemistry
An improper pool water chemistry can cause severe damage to the pool’s surface, pool decks, equipment, and bathers. So, professionals such as our pool maintenance Gilbert, AZ experts recommend checking the pool water chemistry at least twice a week to ensure the chemicals remain well maintained in the pool.
Tip #5: Use a Shock Treatment
With the help of a professional weekly pool service, you can shock the pool to add some extra doses of chlorine. It helps to clear any chloramines which may cause bacteria buildup, murky water, and algae blooms. In between weekly treatments, it’s important to shock the pool, especially during heavy rainfall, pool party, etc.
Tip #6: Look for Leaks
One of the critical parts of swimming pool maintenance is to check for leaks. This is the reason why professionals like our pool maintenance Gilbert, AZ technicians always look for any problems during the weekly service because the earlier you can catch the problems, the better it will be.
Tip #7: Create a Cleaning Schedule
During the summer months, your pool will be used often. Therefore, maintaining its sanitation and cleanliness should be the top priority to keep it safe for users and avoid hefty damage and repair costs. You can consult with our professional Gilbert pool cleaning team and create a schedule to get the best results.
These are the seven expert-suggested tips to follow during the summer months. If you’re unable to cope with the cleaning regimen, then you should deploy a swimming pool contractor and repair expert in Arizona.
What’s the Best Way for Keeping Your Pool Clean in the Summer?
If you are searching for the best ways for keeping your pool clean in the summer, pH Balanced Pool is here to help. We are one of the most trusted and renowned Gilbert pool cleaning experts in the state of Arizona and have been serving our clients for several years now.
To keep your pool water sparkly clean and maintain proper pool chemistry, contact us today and get professional assistance. Our representatives will provide you with a detailed brief on our rates and a list of services provided.
Swimming pools are often considered one of the best additions to your backyard that not only elevate the beauty of your house but also provide you with a space for relaxation. However, not many pool owners are aware of the fact that swimming pool water levels should be appropriately maintained and circulated.
Regardless of the type of pool you may have, the water level can make or break the backyard oasis. If your pool water level is too low, the motor can get damaged while a high water level may lead the engine to run inefficiently. Since pool equipment repairs are expensive, it may cost you a hefty amount to repair the damages.
To save on costs from swimming pool repair services or swimming pool remodeling services, it’s important to understand the correct water levels and pool water circulation. Let’s keep on reading to discover more about what our professionals at Gilbert swimming pool contractors have to say about this.
Why Are Pool Circulation & Water Levels Important?
Since pool water doesn’t have any movement, this stagnation leads to the formation of algae, debris, and other bacteria that may be harmful to people who’re swimming in the pool. This is why pool water circulation is crucial. It helps to keep the water clean and prohibits the formation of algae. This can lead to uncomfortable swimming pool water.
For the pool pump to operate successfully and provide you with a sparkling clean pool, water level plays a crucial role. Otherwise, it may lead to hefty pool equipment repairs. Generally, when measuring water level, the skimmer should be the guide. The water level should always be halfway over your skimmer and tile line.
If the pool pump malfunctions, it will lead to a green pool due to the formation of algae. Although there are steps to clear a green pool, the correct water level can save you from facing such a devastating situation and expensive pool equipment repairs in the long run. Pool repairs can run from a few hundred dollars to thousands.
What Can Happen if I Don’t Check My Water Levels?
There are several things that can occur from not checking your water levels and maintaining proper pool circulation as described above but the worse thing that can happen is you cause major damage to your water pump and filtration units. Depending on the size of your pool and pump, the repairs and replacement costs can be pricey.
If you are unsure about the proper water levels and pool water circulation in your swimming pool, it’s a good idea to contact the experts at pH Balanced Pool. We offer professional advice and can come to see your problem in person by sending a field technician to your residence or place of business.
When you choose pH Balanced Pool Services you can expect the following:
Fast response times
Professional assistance
Weekly pool maintenance
Expert pool repairs and installation
High-quality parts and labor
Friendly and courteous field technicians
Affordable rates and maintenance plans
And more
Here at pH Balanced Pool, we provide everything you need for proper pool circulation and water levels to pool repairs and new installations. We offer the best material and parts for all of our repairs and installation services. If you want the best and cleanest swimming pool water in Gilbert, then you need pH Balanced Pool Services.
Here Are Your Best Steps to Clear a Green Pool
Moreover, if the weekly pool services aren’t correctly done, it may lead to equipment damage and algae formation, which further results in a green pool. There are steps to clear a green poolsuch as brushing the pool walls, testing pH level and alkalinity, shocking the pool with chlorine, etc.
However, it takes professionals such as our swimming pool repair services to clean the pool efficiently. This is why pH Balanced Pool is here to offer swimming pool remodeling services, pool maintenance, and pool equipment repairs to provide you with safe and clear pool water throughout the year.
Contact us today and see why everyone in Gilbert loves the pH Balanced Pool and our high-end residential and commercial pool services for proper pool circulation and water levels.
Swimming pool algae is often caused due to bad filtration, pool water chemistry, and low chlorine levels. In addition, algae can also be introduced into the pool water by the toys or swimwear used in water. Regardless of the reasons, you must act fast and avoid leaving algae for too long in water for it to multiply rapidly.
Generally, there are three different types of algae found in a pool. This includes green algae, black algae, and yellow algae. Green ones are the easiest to get rid of. Simple weekly pool maintenance conducted by professionals can kill such algae. Yellow ones are often found if the climate is humid and it requires brushing the pool to clean them.
While the most difficult algae to get rid of is the black algae which basically turns into bacteria. It requires professionals like Gilbert pool services to perform a few steps using high-end equipment to efficiently kill the algae. Let’s keep on reading to discover the reasons that cause algae in pools and the ways leveraged by experts to get rid of it.
What Causes Algae in Your Pool?
There’s no single reason that causes algae in a swimming pool. According to the experts like Gilbert pool cleaners at pH Balance Pool algae spores can enter the pool water through dirt, rain, and wind. When these pervasive spores multiply in the water, turning into a full-fledged algae bloom and growing on the walls, it becomes a huge problem.
Algae can be caused by other influences like low chlorine levels, dirty filters, improper water circulation, imbalances in pH levels, contaminated swimwear, and other various types of foreign materials. However, it should be noted that algae prevention through weekly pool maintenance is deemed a lot easier than treating a large problem.
Tips to Get Rid of Algae With Pool Cleaners in Gilbert
Professionals like Gilbert pool services consider a few things pretty critical to prevent algae formation. This includes keeping the pool water properly balanced, cleaning the filter system once a week, circulating the water effectively, and other basic pool cleaning methods.
Apart from that, there are a few tips that experts leverage to get rid of algae quickly and keep your pool water looking fresh and clean, making it safer for everyone who likes to use it. You should also wash off your rubber duckies and flotation devices with pool cleaning solutions and a garden hose to prevent the spread of algae.
Here are three tips to remove pool algae by professional pool cleaning Gilbert experts at pH Balanced Pool:
Pool cleaners in Gilbert consider vacuuming the pool manually in order to remove algae.
It’s important to brush the pool walls including the corners, shardy areas, and crevices where the algae are often found.
Consider testing the water during weekly pool maintenance to ensure the chlorine and pH levels are properly balanced.
These are just a few of the tips provided by professional pool cleaning Gilbert experts to get rid of algae within a short period of time. For the best results, use weekly pool cleaning services that have proven track records with a footprint already stamped on the community.
Take a Splash: Get the Best Pool Cleaning Gilbert Has to Offer Today
Ultimately, the goal of weekly pool maintenance provided by expert pool cleaning Gilbert services is to never have any algae in the swimming pool. However, for this, you have to consider choosing the best person to hand over the task of cleaning the pool thoroughly.
You can trust pH Balanced Pool for all your pool concerns as we are one of the most reputable weekly Gilbert pool service providers. To get more information, click here to get in touch with the experts at pH Balanced Pool in Gilbert, Arizona.
For pool owners living in Gilbert, Arizona, owning a pool is slightly different than owning one anywhere else. From hot summer temperatures to violent monsoons, Arizona’s weather can cause havoc on swimming pools that can be used all year. It’s the reason why swimming pools in Arizona need heated or non-heated water sometimes.
Some homeowners may decide to shut the pool down for the year but others, like to use them year-round. Therefore, pool maintenance and repair in Gilbert and surrounding areas become paramount for many pool owners who do not have the time to properly maintain their swimming pools.
To learn more about pool maintenance Gilbert, AZ, the difference between non-heated vs heated pools in Gilbert, Arizona, and the benefits of having the best pool service provider in the area, keep reading.
What is the Difference Between Non-Heated vs Heated Pools?
Non-heated pools work off the temperature of the sun while heated pools typically operate off three different heating systems. However, pool heaters do not work the same way but have the same goal.
According to the pool equipment repairs Gilbert, AZ, pH Balanced Pool, there are three different types of pool heaters. How often you like to swim and what the average temperature in Gilbert is can determine what pool heater will work the best for you.
Here are the three main types of pool heaters for Gilbert pool owners:
Natural Gas
Natural gas pool heating systems can heat your pool within a few hours as opposed to electric and solar heating systems which can take a day or two. They work by burning the natural gas in a combustion chamber by heating the cool water that circulates through the pipes.
Resulting in raising the water temperature to warm and comfortable temperatures that are returned to the pool. This process continues until the pool water reaches the desired temperature you set on the thermostat.
Electric
According to pool maintenance Gilbert, AZ providers, electric pool heaters are a great solution for Arizona pool owners wanting to extend their pool season into the spring and late fall. The electric pool heater works much like the way the electric hot water systems do in your house.
They work by drawing outside air into an evaporator air coil and circulating the air, then the liquid refrigerant works to absorb the heat from the evaporator coil and turns it into a gas, passing through the coil via the compressor where the heat is increased.
As the pool water and gas are pumped through your heat exchanger, the heated gas transfer the heat into the water. The heated water gets circulated and pumped back into your pool at the temperature you want by adjusting the thermostat.
Solar
Solar pool heating systems are one of the easiest ways to heat your pool water in Gilbert, Arizona. This heating system works by installing solar thermal panels on the ground or the roof of a nearby structure such as a house, storage shed, garage, or pool changing room.
Ph Balanced Pool and the best pool equipment repairs Gilbert, AZ report that solar pool heating systems are one of the best ways to heat your pool water due to the abundance of radiant sunshine in Arizona. Heat is harnessed by the sun and used to heat the thermal panels that heat your pool water.
Your pool water gets pumped into the solar panels as each solar panel comes with many small diameter tubes. Your cooler pool water runs through these tubes and back into your pool, making your pool the perfect temperature for swimming. This process continues until your pool water is cooler than the solar panels.
As you can see from the list above, heating your pool water is rather easy with the right heating system and the best pool service provider, pH Balanced Pool.
Where to Get the Best Non-Heated and Heated Pool Service in Gilbert, AZ?
When it comes to heated pool repair and new heating systems, there are many styles and options to consider when searching to invest your money into a pool heater. Pool heaters are a very useful device when you want to maintain a steady or preferred water temperature for your swimming pool.
Taking the time to learn the basics of the different types of pool heaters can help you determine the pool heater that works best for your Gilbert pool. However, it’s always a good idea to call the pH Balanced professionals and the best pool equipment repairs Gilbert, AZ to look at your swimming pool’s footprint.
Contact pH Balanced Pool today by giving us a call or filling out our contact form to schedule a consultation and get your pool heater installed or repaired for the best water temperatures all year in Gilbert, Arizona.
With yearly temperatures in Gilbert, Arizona keeping things balmy, especially during the summer months, having safe and effective chlorine levels becomes essential for a number of reasons. Unclean pool water can cause a variety of health conditions and damage to your pools.
For homeowners who are unsure, pool maintenance Gilbert, AZ is the best way to keep your pool’s chlorine levels safe at all times. Sunlight, heat, and rainwater runoff can all affect the levels of chlorine in your pool. Therefore, before you dive right in, it’s a good idea to know how clean and safe your water is.
To discover the best tips to check the chlorine level of your pool, keep reading and learn how the best pool cleaners do it like the professionals at pH Balance Pool Service in Gilbert Arizona.
Why pH Balanced Pool Maintenance Gilbert, AZ?
Having pH Balanced pool maintenance Gilbert, AZ is the best way to keep your pool user-friendly and free from bacteria and other infectious diseases. Since pool water is recycled through pumps with chlorine tablets and not a steady supply of fresh drinking water, ensuring that your pH levels are safe becomes paramount.
Sun rays are known to cause damage to the pH levels of chlorine; however, extremely hot days can create more breakdowns. For example, a hot summer day with temperatures over 80 degrees Fahrenheit can produce twice the amount of chlorine in your pool.
Since bacteria love wet and warm environments, it can cause higher chlorine levels. Additionally, water can evaporate up to an inch daily, leaving bacteria exposed along the outer edges of the pool.
Use of the Pool
The reason most people get a pool is to use it and with that comes organic materials and other oils off our bodies that give the chlorine more work to do. The hotter the sun and weather are, the more people use it; therefore, keeping accurate pH levels of your pool water is important.
Pool maintenance companies like pH Balanced Pool Services can schedule a routine pool cleaning and test your pH levels and adjust the amount of chlorine in your pool. This is especially important if your pool is used by a lot of people.
Ultraviolet Rays
Ultraviolet rays (UV) can affect your skin and chlorine levels as well as drop by 90% in just a few hours of the hot Arizona sun. UV rays work on a molecular level and the chlorine in your pool gets released as a gas into the atmosphere. Leaving your chlorine levels to drop off rather quickly.
This can make bacteria, algae, and other organic materials grow in your pool, even if you might think the water is properly chlorinated. For the safest levels of chlorine and pool cleaning, use a ratio of 1 part per million to prevent unwanted microbes.
Other tips to check the chlorine level of your pool include a through inspection in the springtime. Your pH levels should be between 7.2 and 7.6 with your pump running and moving the water without any obstructions in the line or catch filters in the pool.
If you are looking for the best pool cleaners and routine maintenance in Gilbert, Arizona, call pH Balance Pool Services today or click here to fill out our contact form for more information about our yearly maintenance pool cleaning plans.
Although, there may be a few pool maintenance companies in Gilbert, AZ, there’s only one pH Balanced Pool Services.
If you have both a spa and a swimming pool, a quick glance at the labels on your chemicals may have you wondering why you can’t use them interchangeably. After all, their contents are nearly identical. What can it hurt if you’re in a pinch and need to treat your spa but only have pool chemicals on hand?
Are pool and spa chemicals the same? The answer to this question is no. There are several reasons why the answer is no, which we will explain in this article. The consequences this will have on equipment and bathers are not worth the apparent quick fix. Here are some reasons why pool and spa chemicals are not the same and why they should be used for their intended purpose.
1. Pool And Spa Have Different Accommodating Capacity
A typical spa seats three people, whereas a swimming pool can accommodate 100 people. The amount of water each holds determines the amount of chemical dilution each requires. While the chemical components are very similar, a closer look at the ingredient list reveals that the concentrations are very different.
As a result, if you try to add pool chemicals to your spa, the water chemistry levels will become completely unpredictable. On the contrary, you can add every drop of your spa chemicals to your swimming pool, and the pH levels would likely remain unchanged.
2. Pool And Spa Have Different Recommended Temperature
A swimming pool’s recommended temperature is 85 degrees, while spas range from 90 to 104 degrees. Pools and spas face different challenges that chemicals must address due to the temperature difference. Because the steamy water in a hot tub is ideal for bacterial growth, sanitizer is an essential component of the chemical makeup required for a hot tub.
Chemical reactions occur much more quickly and vigorously at higher temperatures. As a result, adding highly concentrated swimming pool chemicals to your small hot tub is hazardous to both the bathers and the hot tub.
3. Spa Jets Cause More Stir Than Pool Jets
While both pools and hot tubs have circulation jets, hot tubs have more jets per square foot. The jets’ constant circulation of water, delivering relaxing massages, and bubbling with steam, is part of the spa experience. Pool jets also circulate the water, keeping it from becoming completely stagnant. Still, you won’t notice them unless you’re next to them.
Hot tubs quickly stir up chemicals due to the way they stir up the water. Introducing highly concentrated pool chemicals into a hot tub quickly creates a dangerous imbalance. Evaporation is also increased by the constant movement of water in hot tubs. The chemical reactions intensify as the spa loses water.
4. The Chemistry Of Pool And Spa Differs
It may be tempting to deplete your swimming pool supply throughout the year while the hot tub is still in use, but this is not recommended. To avoid dangerous chlorine and pH levels, swimming pool chemicals should not be used in a hot tub. Always test your water for calcium hardness, alkalinity, pH, and free chlorine. Maintaining proper water balance will extend the life of your pool’s mechanical components.
Conclusion
As you can see, the differences in chemical treatment between spas and swimming pools necessitate a difference in chemical treatment. If you have any questions or concerns about how to treat your pool or spa or general pool service, we are here to help.
In fact, you can cross that chore off your list by letting us handle your weekly or monthly maintenance as well as providing you excellent services on how to get your pool ready for summer in gilbert Arizona. Our custom pool designs for all budgets frequently include built-in spas or hot tubs, and we are well-versed in treatment options. PH Balanced Pool is here for all of your pool needs!
Arizona is known to have one of the warmest summers in the country. To make the summer more bearable, you would love to go for a dip once in a while, especially if you are a pool owner. After reopening your pool for the summer season, you have to tick certain steps off your checklist including pool tile cleaning to ensure the pool is in good condition.
You will have to apply even more caution if you are preparing to host a pool party. This is to avoid any accident or damage during or after your party. We will take you through a few ways you can throw the most memorable pool party in this article.
How to prepare for a Pool Party
Solo swimming isn’t nearly as much fun as throwing a pool party with your friends and family around. You want to make sure it doesn’t turn out to be a disaster for either you or anyone around too. First off:
Choose a theme for your party
As with any other kind of party, your pool party needs a theme to make it fun. People can dress up and wear all kinds of colourful costumes to the party. Party themes could even influence the kind of food or snacks that would be served at the party but you don’t have to go that far especially if you are on a budget.
You can decide to make it a little mermaid themed party, a SpongeBob themed party or anything at all. It’s your party and only you can decide what you would like to do with it; If you are feeling confused and wondering if your guests would like it, you can sample opinions from a few of them weeks before it’s time.
Food and Drinks
Just as we have previously mentioned, foods and drinks can be picked according to the theme but if such won’t fit in your budget, a few snacks and drinks here and there won’t hurt. The last thing you want to do is keep your guests starving or thirsty during your event. It would be nice to ensure there’s a sufficient flow of food and drinks at the party to keep mouths busy and hearts happy.
Party Decorations
Decorations are what set the mood for any party. Whether it’s a regular party or a themed one, your decorations will have a significant impact on how well your party will go. Get helium balloons, party plates, confetti and other decoration items. You can even hire an event manager if decoration would be too stressful for you to oversee or do yourself.
Plan Games and Activities
This is arguably the best part of a pool party. This is what makes up the party itself, you need to decide what activities you would like to have at your pool party. Card games, ping-pong, and basket games are a few games you can plan to have at your pool party. While some people would rather swim, lounge or sit by the pool, others will want to have more than that and to make your party a memorable one, you have to give them what they want.
Clean the Pool
If your pool party event is the first time you will be using your pool in summer then you need to clean it up. Cleaning includes fixing the leaking pipes, bad faucets, pool tile cleaning, and removing calcium buildup. Clearing up dirt that might be hanging around in the pool such as stray leaves or litter will keep your pool in good condition. You can also hire the services of a professional to carry out a pool inspection which includes checking the chemical balance of the pool and pool equipment to make sure everything is functioning properly.
Conclusion
We offer quality and affordable pool services in Gilbert Arizona, all you have to do is to contact us and let us know what you need and when we can come in to help your pool health. You can be sure of getting the best pool services from us.
One of the greatest assets any homeowner can have when it comes to landed property is a pool. Apart from its numerous health benefits, it also increases your property’s value and the aesthetic appearance of your compound in general. All you have to do is to properly maintain the pool and make sure it is always in good condition.
When you close your pool in the winter period, it is only right that you open it up again and prepare it for summer activities. In this post, we will be discussing the various steps you need to take to prepare your pool for the coming summer period. We will give you tips on pool tile cleaning and tricks you can use to ensure that you are a happy pool owner.
Steps to get your pool ready for Summer
In no particular order, we will discuss the steps involved in getting your pool ready for summer in the section below:
Never empty your Pool
Emptying your pool during any season at all is never a good idea, especially if your pool is located in a place that has a high water table. The weight of the water helps to keep the ground from lifting, so even if your pool is dirty and you want to clean it, you should drain the pool and put clean water in it to prevent such an occurrence.
If you are closing it for the winter period, you still should not leave it empty. As simple as covering a pool is, it is a maintenance step many people overlook. Keeping your pool covered prevents leaves or debris from getting into it and making it a mess.
Clean your pool
Your pool has stayed covered throughout winter, and now it’s time to put it to use again; neither the pool nor the water in it will be in good shape. You will need to clean the pool by getting rid of any leaves or debris with a scoop net or any other useful cleaning material you can find.
How to fix a cloudy pool? Using a pool vacuum cleaner can also help you remove smaller dirt particles your scoop net isn’t capable of getting rid of. You will also need to clean your pool’s roller shutter, cover, edge of the pool, and the pool tiles so you can remove any dirt or limescale that might be hanging around them.
Ensure Technical Installation is in good shape
Apart from cleaning your pool, you need to make sure that the technical appliances in your pool are in good shape. You will need to check if the pump is functioning properly; the filter also needs to be unclogged if there is any debris blocking it. Replace your sand filters at least every three years and ensure that your pool pipes, skimmers, and inlets are not broken or dirty.
Check Water Quality
Swimming in acidic or highly alkaline pool water could be risky for the skin, which is why you need to test the water quality of your pool. Your pool water quality should fall within a certain range before it can be considered healthy. The pH value for a healthy pool should be within the range of 7.2 – 7.6 ideally. Anything outside this range would need to be improved and restored to normal quality. When you decide to prepare your pool for summer, it is important that you consider this and let professionals do the job.
Conclusion
Everyone knows that the summer season is usually hot and dry. It’s that season when all you want is to cool off in a pool after a long day’s work. If you are a pool owner, then you already know that having a pool during the summer will do you a lot of good.
Either you want to throw a house party soon, or you just enjoy relaxing in the pool, you will need to prepare your pool for the season. Some people would rather carry out the whole process themselves, but we recommend the services of professionals like us to ensure that you are not missing any steps.
Water that seems milky or has a muddy, unattractive aspect is described as “cloudy.” This is due to a huge number of microscopic particles reflecting sunlight, better call pool cleaning services Gilbert AZ.
The most common cause of cloudy pool water is an imbalance, insufficient filtration, an overabundance of particles, or external variables.
Here, we’ll look at some of the most prevalent causes of hazy pool water, as well as some suggestions for restoring your pool’s clarity.
What Causes Cloudy Pool Water?
There are several reasons why your pool water may be cloudy. These include:
POOR FILTRATION
Your pool will grow hazy and dirty when the water becomes stagnant if your filter’s function is affected. 90% of cloudy pools are caused by insufficient filtration, which can be caused by a clogged filter, a dead pump, or simply not running it long enough.
TOTAL ALKALINITY TOO HIGH
Cloudiness is frequently connected with pool water that has high total alkalinity. This is because it might produce a pH imbalance and calcium scaling. If your total alkalinity is higher than 200 ppm, you’re at risk of a hazy pool, and your chlorine will be less efficient, more like if your pH is off.
EXCESS PARTICLES FROM SWIMMERS
Your hazy water could be the result of extra particles accumulating when swimming. The most common particles discovered in swimming pools are sunscreens and oils, as well as make-up, perspiration, body oils, and biological fluids. These reflect light, giving the impression of a foggy pool.
ENVIRONMENTAL DEBRIS
Environmental debris such as leaves, twigs, and flowers can contaminate your pool’s water, especially if the circulation in your pool isn’t perfect. Pollen, dust, and bird droppings, for example, can have an impact on the appearance of your filter and can build up over time.
RAINWATER
If your pool water has become hazy as a result of a recent heavy storm, this is most likely the problem. Because rainwater can carry nitrates, phosphates, and other contaminants into your pool, this can make it cloudy. In addition, heavy rain may dilute your chlorine levels, making it less effective, use Green-To-Clean services.
Is Cloudy Pool Water Safe?
The dangers of cloudy water are numerous. First, if you can’t see the drain at the deepest section of the pool, there’s a good chance you won’t see someone down there.
People who are drowning rarely splash or shout, contrary to popular assumption. When you’re drowning, your body’s natural reaction is to freeze and do nothing. If you can’t see very far into the pool, there’s a good chance you won’t see someone drowning.
How to Fix Cloudy Pool Water
It’s time to locate a cloudy pool water cure after you’ve explored all of the probable problems that could be causing your pool water to become hazy. Here are some methods for clearing your hazy pool.
Check Your Filter
If your pool water is hazy, the first place to look is at your filter. The presence of particulate matter in your pool is usually the cause of cloudy water. The first line of defence against particulate matter is your filter, which is also the primary means for removing it.
A pool filter is a rather straightforward piece of equipment. It does not require power and has a small number of moving parts. The pump is the most critical aspect of your pool filtration system. As long as the pump is running, the water in your pool will be pushed through the filter, which will trap small particles as it passes through.
Check Your Water
If the filter is working but the water is still cloudy, the next place to look is your water supply. First, make sure your water is physically clean. Your water filter is designed to remove microscopic particles that generate hazy pool water, but it isn’t designed to handle leaves or other heavy debris. Remove any heavy particles from your pool by skimming it.
After that, use a stiff brush to scrub the pool’s walls and floor. Finally, vacuum the pool to remove any debris or particles that were knocked loose with the brush. As part of your weekly maintenance plan, you should perform this a couple of times.
Don’t be surprised if your pool water is hazy if you haven’t done it in a while. The chemistry of your pool is the next area to look at. Although physical pollution is the direct cause of hazy pool water, poor chemistry can contribute to it.
Conclusion
Using the most effective chemicals will save you time and money while also guaranteeing that your pool is clean and healthy once the task is completed.
Don’t just waste chemicals and money on your green pool because it’s green. Request a Green-To-Clean service from PH Balanced Pool instead, and enjoy the peace of mind that comes with knowing your pool will be properly treated and cleaned.
Let’s face it: you bought a pool to unwind, have fun, and provide hours of entertainment and activities for your family. However, pool ownership sometimes necessitates draining the pool for maintenance. For a variety of reasons, draining your swimming pool may be necessary.
Before emptying your pool, read this article to learn about the reasons for draining and whether or not it is required. Also, before you begin, make sure you know where to drain the pool water. A reliable pool tile cleaning company in Gilbert AZ will help you to do it right.
When is the best time to drain a pool?
Due to these temperature parameters, the ideal time of year to drain a pool is usually in the spring or fall. Spring is a fantastic time to go because the freshwater will be perfect for swimming in the summer. Fall is another option, but most experts advise against leaving your pool empty throughout the winter, so you’ll need to at least partially fill it.
Why You Should Periodically Drain Your Pool
A swimming pool can be drained for a variety of reasons. Make sure you understand why you’re draining your pool because you’ll have to pay more for water when you have to replenish it. The cost of draining your swimming pool may be necessary for some circumstances since the benefits will outweigh the risk of future excessive pool upkeep and repair.
Dry climate
The more water evaporates, and your pool loses water, the hotter and drier the climate becomes. You’ll have to fill your pool with water more frequently if this happens. If you fail to fill your pool and the water level falls too low, the water can become “hard.” The chemical balance of the pool becomes more difficult to maintain as a result of this.
Routine heavy pool cleaning
To give your pool a thorough pool tile cleaning, experts recommend draining it completely every five to seven years. After years of usage, even pool water that has been treated with chemicals regularly can become impossible to clean with chemicals. To correct this, you’ll need to drain and refill your pool to start over. Pool water is exposed to harsh chemicals over time, which can make it more difficult to clean.
Pool repair or painting
A thorough pool drain is required when you need to repair components of your pool. This could be due to a pool crack or unidentified leaks. If your pool is leaking, you may need to empty it to prevent water from leaking into the ground beneath and surrounding your pool.
When NOT to drain your pool
Aside from the numerous reasons to drain your pool, there are a few reasons to refrain from doing so
If you don’t have a place to drain the water
Draining your pool onto the earth surrounding it is never a good idea. The water will soak in the region around your pool and flow to the sides and beneath it. This can lead to pool “floating,” which can result in popping or cracks in the pool’s bottom. This may necessitate pricey repairs.
If you have a fiberglass pool
If you have a fiberglass pool, contact the manufacturer for information relevant to your pool. The walls of a fiberglass pool might bulge out, and the floor can crack when the water is drained. This can frequently result in high repair costs.
How to Drain Your Pool
The groundwater levels should be considered when draining your pool. If the water levels in the area are high enough, your empty pool may pop out of the ground. Furthermore, fiberglass and vinyl liner pools require specific attention because they are not designed to be completely drained. Removing all of the water from these ponds might cause the surface to bend or crack.
The safest option to drain your pool is to utilize a submersible pump once you’ve examined the groundwater situation and the needs of the sort of pool you have. Pool supply companies and hardware stores frequently rent these. While the filter pump can be used to drain a pool, you risk ruining an expensive piece of pool hardware if you do so.
Pool water is usually emptied into your property’s sewage exit. Because sewer pipes are not designed to handle large amounts of water at once, the outflow should be limited to 12 gallons per minute or fewer.
Draining a pool completely using a garden hose can take a day or more. In most situations, it will need to be partially refilled after that, so count on the process taking a couple of days at the very least. BI-WEEKLY POOL SERVICE will relieve you of the worry of draining your pool and provide you with a high-quality, low-cost service.
Risks of Improperly Draining Your Pool
There are a few risks:
The pool can heave out of the ground.
Your pool may be harmed by the sun and exposure.
Your filter pump may be damaged or burned out.
The sewer system might back up into your home.
Conclusion
There are advantages and disadvantages to draining your pool. Make sure you know what you’re doing before draining your pool.
Many times, if your pool is covered by a manufacturer’s guarantee, the manufacturer will not cover repair costs due to your negligence in draining your pool. It’s best to contact your pool manufacturer just to be safe.
Although during the summer months, pool water temperature tends to hike up quickly but there are still ways to cool down your pool. This includes adding water features, keeping your pool clean in the summer, shading the pool, using reversible heat pumps and evaporative coolers, etc.
Regardless of the type of pool you may have, the water level can make or break the backyard oasis. If your pool water level is too low, the motor can get damaged while a high water level may lead the engine to run inefficiently. Since 
Moreover, if the 
Generally, there are three different types of algae found in a pool. This includes green algae, black algae, and yellow algae. Green ones are the easiest to get rid of. Simple weekly pool maintenance conducted by professionals can kill such algae. Yellow ones are often found if the climate is humid and it requires brushing the pool to clean them.
Apart from that, there are a few tips that experts leverage to get rid of algae quickly and keep your pool water looking fresh and clean, making it safer for everyone who likes to use it. You should also wash off your rubber duckies and flotation devices with pool cleaning solutions and a garden hose to prevent the spread of algae.
While both pools and hot tubs have circulation jets, hot tubs have more jets per square foot. The jets’ constant circulation of water, delivering relaxing massages, and bubbling with steam, is part of the spa experience. Pool jets also circulate the water, keeping it from becoming completely stagnant. Still, you won’t notice them unless you’re next to them.
Emptying your pool during any season at all is never a good idea, especially if your pool is located in a place that has a high water table. The weight of the water helps to keep the ground from lifting, so even if your pool is dirty and you want to clean it, you should drain the pool and put clean water in it to prevent such an occurrence. 
Apart from cleaning your pool, you need to make sure that the technical appliances in your pool are in good shape. You will need to check if the pump is functioning properly; the filter also needs to be unclogged if there is any debris blocking it. Replace your sand filters at least every three years and ensure that your pool pipes, skimmers, and inlets are not broken or dirty. 
Everyone knows that the summer season is usually hot and dry. It’s that season when all you want is to cool off in a pool after a long day’s work. If you are a pool owner, then you already know that having a pool during the summer will do you a lot of good. 
Cloudiness is frequently connected with pool water that has high total alkalinity. This is because it might produce a pH imbalance and calcium scaling. If your total alkalinity is higher than 200 ppm, you’re at risk of a hazy pool, and your chlorine will be less efficient, more like if your pH is off.
If your pool water is hazy, the first place to look is at your filter. The presence of particulate matter in your pool is usually the cause of cloudy water. The first line of defence against particulate matter is your filter, which is also the primary means for removing it.
Using the most effective chemicals will save you time and money while also guaranteeing that your pool is clean and healthy once the task is completed.
The more water evaporates, and your pool loses water, the hotter and drier the climate becomes. You’ll have to fill your pool with water more frequently if this happens. If you fail to fill your pool and the water level falls too low, the water can become “
The groundwater levels should be considered when draining your pool. If the water levels in the area are high enough, your empty pool may pop out of the ground. Furthermore, fiberglass and vinyl liner pools require specific attention because they are not designed to be completely drained. Removing all of the water from these ponds might cause the surface to bend or crack.
