Constructing a swimming pool offers great advantages including the fact that you can customize everything starting from the shape of the pool to its size and features like lighting and waterfalls. In addition, you can decide on the right filtration system, pool material, and other important factors to get a long-lasting pool in Arizona.
People often wonder about the real cost of an Arizona pool. At large, the price for building an inground pool in Arizona can range between $25,000 to $100,000, depending on a range of factors like size, shape, material, etc. However, the most important part of keeping up a swimming pool is weekly pool maintenance.
Let’s keep reading more about the real cost of an Arizona pool and the other aspects that go into the construction.
Why is Pool Maintenance Important?
Without the right pool maintenance, chemical levels in the water will remain imbalanced, causing further damage to the skin and eyes. This is why not only the construction of a pool is important but also maintaining a pool by professionals such as pH Balanced Pool, the best residential pool service Gilbert, AZ has to offer.
A pool is undoubtedly an investment. Therefore, like any other investment, you must take care of the maintenance part of it to keep it functioning for longer periods of time. A lot of people still put off pool maintenance and it leads to expensive repairs in the long run as the structure of the pool gets damaged.
Here are a few reasons why maintaining your pool with professionals like residential pool service Gilbert, AZ, and expert advice from pH Balanced Pool is crucial:
Weekly pool upkeep practices can keep the water balanced. It means the chemical levels will be safely balanced to keep safe and clean water to swim. This is especially important if you have little ones with sensitive skin who love to stay in the water and play.
Gilbert pool maintenance professionals also help to maintain the pool hardware that may otherwise stop working within a short period of time if neglected. Contact Ph Balanced Pool today and get our weekly maintenance prices over the phone or via email.
It saves you from expensive repairs by catching small damages at an early stage. This can save on busted water pumps, cracked water hoses, degraded water seals, and damage to your water filtration system.
These are the reasons why experts advise maintaining your pool and it should always be done by professional weekly pool services to avoid causing any major damage to the pool, especially if you just had a new in-ground pool installed. Ultimately, it is also a good idea to have your pool properly maintained by experts.
Save Money on Residential Pool Repair Services Gilbert, AZ
Owning a pool in Arizona is certainly fun. During hot summer days, you can do nothing else but relax in your own customized pool. Also, you can organize some pool parties to have a blast during weekends. However, pool cleaning in Gilbert by professional services is something that should never be avoided to keep your pool in pristine shape.
pH Balanced Pool, a professional and highly experienced pool cleaning in Gilbert is here to offer you help if you’re looking for weekly pool services. From cleaning to maintaining your pool, we can take care of everything you need on a weekly basis.
For further information and to connect with our experts,contact ustoday and see why so many home and business owners trust us for their pool services.
Swimming pools are an excellent recreational source and almost a must-have to navigate through rough summer days. However, your entire swimming pool can become dangerous if you neglect pool maintenance and it results in the pool lights not working. The pool lights not only enhance the pool’s aesthetics but also act as a safety feature.
They prevent people from accidentally falling into the pool during the night hours. So, if your pool lights aren’t working because of a tripped circuit breaker, damaged wiring, blown fuse, or any other reason, you need immediate help. It is why pool owners should periodically hire services from experts for pool repairs to prevent any major issues.
Properly working pool lights can elevate your outdoor ambiance, highlight special pool features, enhance nighttime visibility, and more. To learn more, keep reading this article to know why your pool lights aren’t working and how a pool repair service can help keep them on.
What is a Pool Light?
A pool light is a well-fitted electrical fixture designed for swimming pools. These lights are installed underwater in pools by professionals for pool repairs to illuminate the pool at night. It makes swimming easier during the dark. This is why pool light repair service is required to keep the lights working and your pool safe.
Further, not only do pool lights illuminate the water in your pool but they also help with the perimeter of the pool deck and can act as a safety feature if you do not have any other lighting pool fixtures.
While there can be many reasons behind your pool lights not working, some common reasons include:
Pool Light Leakage
A common reason behind pool lights not working is pool light leakage. It occurs when water from the pool gets inside the light. An excellent way to fix it is by calling a reliable Gilbert pool light repair professional and getting the broken light replaced with resin-filled LED light.
You can also ask your pool service provider if they have any other suggestions other than the current lighting system you have to see if theirs are more energy-efficient and longer-lasting.
Busted Pool Light Bulb
According to most Gilbert pool light repair experts, a busted bulb can result in pool lights not working. It can be fixed by removing the light bulb and looking for parts affected by the pool water. Proper pool repairs can be helpful in this case, especially when your pH balance is affected by contaminants in the pool water.
Loose Light Fixture
Loose screws lead to a loose light fixture, making it stop working. To make the lights work, the screws have to be tightened. You can hire professionals like Gilbert pool service to fix the problem without worrying about anything and knowing everything under the water in your Gilbert pool is secure and safe.
In addition to these common reasons, the tripped circuit breaker is another reason. If you turn your pool lights on and they instantly trip, you have a tripped circuit breaker problem. In all cases, you will need a reliable pool repair service to fix these problems.
Where to Find Expert Pool Light Repair Service?
If your pool lights aren’t working, it would be wise to hire the best pool light repair service provider because it takes a professional’s knowledge and expertise to understand the exact reason and conduct the pool repairs. If you’re searching online or asking for recommendations from acquaintances pH Balanced Pool is here to help.
Being one of the reliable and trusted pool light repair services in the Gilbert area, we have the expertise required for complete pool maintenance. To know more about our services,contact ustoday and keep the lights working in your swimming pool.
Swimming pool algae is often caused due to bad filtration, pool water chemistry, and low chlorine levels. In addition, algae can also be introduced into the pool water by the toys or swimwear used in water. Regardless of the reasons, you must act fast and avoid leaving algae for too long in water for it to multiply rapidly.
Generally, there are three different types of algae found in a pool. This includes green algae, black algae, and yellow algae. Green ones are the easiest to get rid of. Simple weekly pool maintenance conducted by professionals can kill such algae. Yellow ones are often found if the climate is humid and it requires brushing the pool to clean them.
While the most difficult algae to get rid of is the black algae which basically turns into bacteria. It requires professionals like Gilbert pool services to perform a few steps using high-end equipment to efficiently kill the algae. Let’s keep on reading to discover the reasons that cause algae in pools and the ways leveraged by experts to get rid of it.
What Causes Algae in Your Pool?
There’s no single reason that causes algae in a swimming pool. According to the experts like Gilbert pool cleaners at pH Balance Pool algae spores can enter the pool water through dirt, rain, and wind. When these pervasive spores multiply in the water, turning into a full-fledged algae bloom and growing on the walls, it becomes a huge problem.
Algae can be caused by other influences like low chlorine levels, dirty filters, improper water circulation, imbalances in pH levels, contaminated swimwear, and other various types of foreign materials. However, it should be noted that algae prevention through weekly pool maintenance is deemed a lot easier than treating a large problem.
Tips to Get Rid of Algae With Pool Cleaners in Gilbert
Professionals like Gilbert pool services consider a few things pretty critical to prevent algae formation. This includes keeping the pool water properly balanced, cleaning the filter system once a week, circulating the water effectively, and other basic pool cleaning methods.
Apart from that, there are a few tips that experts leverage to get rid of algae quickly and keep your pool water looking fresh and clean, making it safer for everyone who likes to use it. You should also wash off your rubber duckies and flotation devices with pool cleaning solutions and a garden hose to prevent the spread of algae.
Here are three tips to remove pool algae by professional pool cleaning Gilbert experts at pH Balanced Pool:
Pool cleaners in Gilbert consider vacuuming the pool manually in order to remove algae.
It’s important to brush the pool walls including the corners, shardy areas, and crevices where the algae are often found.
Consider testing the water during weekly pool maintenance to ensure the chlorine and pH levels are properly balanced.
These are just a few of the tips provided by professional pool cleaning Gilbert experts to get rid of algae within a short period of time. For the best results, use weekly pool cleaning services that have proven track records with a footprint already stamped on the community.
Take a Splash: Get the Best Pool Cleaning Gilbert Has to Offer Today
Ultimately, the goal of weekly pool maintenance provided by expert pool cleaning Gilbert services is to never have any algae in the swimming pool. However, for this, you have to consider choosing the best person to hand over the task of cleaning the pool thoroughly.
You can trust pH Balanced Pool for all your pool concerns as we are one of the most reputable weekly Gilbert pool service providers. To get more information, click here to get in touch with the experts at pH Balanced Pool in Gilbert, Arizona.
The benefits of owning a swimming pool are quite obvious. Along with cooling off with a quick dip on a summer day, partying with friends, and lounging on the poolside, a swimming pool hikes up your property value by a significant percentage. However, buying a house that already has a pool isn’t a perfect doodle or wet noodle.
You must take careful steps before making the purchase rather than neglecting the important steps in excitement. It’s because if the pool is too old, the updates and repairs can be costly. In addition, there are other crucial factors like cracking, clogged filters, unbalanced chemicals, and pumping issues that should be checked thoroughly.
This is why it’s essential to use advice from experts like Gilbert pool repair service to help you inspect your pool thoroughly before you make a purchase. Let’s continue reading this guide to know the importance of professionals while buying a house with a pool.
How to Identify Crack in Pool
Identifying crack in pool: This is certainly challenging, especially if the crack is structural. Generally, there are two types of cracking issues that can be found, structural and surface cracking. Structural cracks are more damaging and need expensive repairs from professionals like Gilbert pool repair service while surface cracks are common.
Not all pool cracks indicate that the pool is leaking. For example, the shrinkage cracks are pretty normal. They are often shallow and it may occur when the pool is shot with shotcrete or gunite. If there’s a structural crack, then there will be leakage issues that will eventually occur.
Let’s take a look at how the professionals at Gilbert pool service identify the pool cracks:
In most cases of swimming pools in Arizona, if the cracks are on the structural level of your pool, it will cause water leakage which is pretty significant for identifying crack in pool water.
Another key aspect is if the water level starts to change when there’s a crack in the pool or if the water keeps on dropping, it can leave you with higher water bills and an endless mission to keep water in your pool.
If you find wet spots in the yard or too much algae growth, there’s a good chance that you’re dealing with a pool crack. This could also be caused by a leak in your water pump or filtration system.
Pool cracks can be easily identified during a weekly pool service as the experts check every nitty-gritty of the pool area during the weekly maintenance visits like the dependable ones from pH Balanced Pool Services.
Pool cracks can easily be fixed especially if you follow a proper maintenance routine by experts from weekly pool service Gilbert. However, if these cracks are left neglected for a long time, it can cost hundreds to thousands of dollars to repair and fix properly.
Further, adding to the reasons to have a pool inspected by an expert before you make an offer to buy a house that comes with a swimming pool.
Best Weekly Pool Service Gilbert to Avoid Pool Cracks
Owning a pool isn’t enough. You need to prioritize pool maintenance by professionals like Gilbert pool service experts to avoid causing more damage to your pool. If left neglected, the small issues can turn into major damage and will cost you thousands of dollars in repairs.
Finding a reliable weekly pool service that offers proper maintenance and pro inspection isn’t an easy task. Considering the number of pool services available in the Gilbert area, the choice can be overwhelming. This is why pH Balanced Pool Service is here to help. To know more about our friendly and professional pool services, contact us today.
In most cases, swimming pool cracks are often found on the pool’s surface body and not on the structure. This is why not all cracks cause the pool to lose water. In cases like this, your pool is losing ½” of its water every day; therefore, there’s a possible chance of it having a structural crack.
Structural cracks are the larger ones that occur in the swimming pool’s shell and often they can be found in different areas of the pool. Since it runs through the concrete, cracks can be apparent in plaster coating and the tile area as well. One of the best ways to prevent this is to contact an expert in pool maintenance in Gilbert, Arizona.
Let’s keep reading and learn more about the major contributor to structural cracks in soil movement where surface cracks occur due to lack of maintenance and why professionals like Gilbert pool services offer the best pool service to help you avoid the cracks.
What Are the Benefits of Weekly Pool Service?
Pool maintenance is not only beneficial for keeping up the long life of your swimming pool but also it’s beneficial for humans in the pool water. Experts like Gilbert pool cleaners never neglect this part as it can cause serious health problems such as skin rashes and respiratory tract irritation in the long run.
Further, when community pools remain closed once a week to maintain their cleanliness, or if you have a private swimming pool at your house, it’s more important to conduct weekly pool service to check its pH levels. You should also check the filters, and the skimmers for dirt as well as for cracks to avoid major ones in the future.
Weekly pool maintenance in Gilbert or any other area can yield the following benefits:
Helps You Avoid Health Issues
Most people think their private swimming pool can’t have any germs because it’s just them using it but the truth isn’t that cut and dry. The truth is that bacteria are introduced into your pool mostly by humans and pets; therefore, are the leading causes of bacteria combined with the elements of nature and groundwater seeping into the pool water.
Experts like Gilbert pool services help to balance the pool chemicals and provide further information to ensure the bacteria and germs are properly destroyed, leaving your swimming pool less susceptible to structural and surface cracks.
Offers You Peace of Mind
When you invest in the best pool service it simply means your pool is properly taken care of. There is nothing to worry about when you have the Gilbert Pool Guy and our professional assistance and expert advice, giving residential and commercial swimming pool owners in Gilbert, Arizona the cleanest and longest-lasting swimming pools.
In case of any unseen damages that may lead to further deterioration, professionals like Gilbert pool cleaners can warn you before surface cracks and structural damage occur. This is where weekly pool cleaning becomes an asset to those who piece of mind and wants the best pool water, reduced maintenance, and repair fees.
Increase Pool’s Longevity
Without proper maintenance, pool water can turn quite corrosive which may further damage the pool and its equipment. Generally, professionals like Pool Repair Gilbert, AZ not only check the water and filters but also looks for any minute signs of damage.
These are some of the benefits of getting your pool maintained by experts like Pool Repair Gilbert, AZ to increase your pool’s longevity.
What Causes Pool Cracks?
A lot of people wonder about the reasons behind a pool crack as this can cause a hefty amount to get it fixed. In case, you tend to neglect weekly pool service, cracks in your pool can be seen anytime in the near future.
Here are the reasons behind a pool crack:
If the pool isn’t designed properly, then it may lead to a crack.
Failure to construct a pool or follow the proper construction plans while building a pool may result in a pool crack.
One major issue that contributes to pool crack is soil movement.
This is why it’s important to conduct weekly pool service to ensure the pool is designed and maintained properly right from the beginning.
Who to Contact for the Best Pool Repair Gilbert, AZ?
The best pool service offered by professionals can yield a lot of benefits. Additionally, it saves you from losing a lot of money on pool repair. You can simply fix it by replacing a few things if the damages are identified at the earliest.
Being a professional service provider in pool maintenance in Gilbert, pH Balanced Pool helps you with weekly maintenance and leaves you with nothing to worry about. Contact us now to discover more about our weekly pool service.
For pool owners living in Gilbert, Arizona, owning a pool is slightly different than owning one anywhere else. From hot summer temperatures to violent monsoons, Arizona’s weather can cause havoc on swimming pools that can be used all year. It’s the reason why swimming pools in Arizona need heated or non-heated water sometimes.
Some homeowners may decide to shut the pool down for the year but others, like to use them year-round. Therefore, pool maintenance and repair in Gilbert and surrounding areas become paramount for many pool owners who do not have the time to properly maintain their swimming pools.
To learn more about pool maintenance Gilbert, AZ, the difference between non-heated vs heated pools in Gilbert, Arizona, and the benefits of having the best pool service provider in the area, keep reading.
What is the Difference Between Non-Heated vs Heated Pools?
Non-heated pools work off the temperature of the sun while heated pools typically operate off three different heating systems. However, pool heaters do not work the same way but have the same goal.
According to the pool equipment repairs Gilbert, AZ, pH Balanced Pool, there are three different types of pool heaters. How often you like to swim and what the average temperature in Gilbert is can determine what pool heater will work the best for you.
Here are the three main types of pool heaters for Gilbert pool owners:
Natural Gas
Natural gas pool heating systems can heat your pool within a few hours as opposed to electric and solar heating systems which can take a day or two. They work by burning the natural gas in a combustion chamber by heating the cool water that circulates through the pipes.
Resulting in raising the water temperature to warm and comfortable temperatures that are returned to the pool. This process continues until the pool water reaches the desired temperature you set on the thermostat.
Electric
According to pool maintenance Gilbert, AZ providers, electric pool heaters are a great solution for Arizona pool owners wanting to extend their pool season into the spring and late fall. The electric pool heater works much like the way the electric hot water systems do in your house.
They work by drawing outside air into an evaporator air coil and circulating the air, then the liquid refrigerant works to absorb the heat from the evaporator coil and turns it into a gas, passing through the coil via the compressor where the heat is increased.
As the pool water and gas are pumped through your heat exchanger, the heated gas transfer the heat into the water. The heated water gets circulated and pumped back into your pool at the temperature you want by adjusting the thermostat.
Solar
Solar pool heating systems are one of the easiest ways to heat your pool water in Gilbert, Arizona. This heating system works by installing solar thermal panels on the ground or the roof of a nearby structure such as a house, storage shed, garage, or pool changing room.
Ph Balanced Pool and the best pool equipment repairs Gilbert, AZ report that solar pool heating systems are one of the best ways to heat your pool water due to the abundance of radiant sunshine in Arizona. Heat is harnessed by the sun and used to heat the thermal panels that heat your pool water.
Your pool water gets pumped into the solar panels as each solar panel comes with many small diameter tubes. Your cooler pool water runs through these tubes and back into your pool, making your pool the perfect temperature for swimming. This process continues until your pool water is cooler than the solar panels.
As you can see from the list above, heating your pool water is rather easy with the right heating system and the best pool service provider, pH Balanced Pool.
Where to Get the Best Non-Heated and Heated Pool Service in Gilbert, AZ?
When it comes to heated pool repair and new heating systems, there are many styles and options to consider when searching to invest your money into a pool heater. Pool heaters are a very useful device when you want to maintain a steady or preferred water temperature for your swimming pool.
Taking the time to learn the basics of the different types of pool heaters can help you determine the pool heater that works best for your Gilbert pool. However, it’s always a good idea to call the pH Balanced professionals and the best pool equipment repairs Gilbert, AZ to look at your swimming pool’s footprint.
Contact pH Balanced Pool today by giving us a call or filling out our contact form to schedule a consultation and get your pool heater installed or repaired for the best water temperatures all year in Gilbert, Arizona.
Pool maintenance in Gilbert, AZ becomes paramount during monsoon season for many good reasons like wind-blown debris combined with trash and fallen tree branches. Plus, there is always an overflow of flood waters that can easily run from the ground to in-ground pools in Arizona caused by the monsoon seasons.
This leaves many homeowners in Arizona in a mess and the next thing they want to know is how to fix cloudy pool water after a monsoon. One of the best things you can do is have a maintenance plan with pH Balanced Pool Service that helps you during these difficult events of mother nature to keep your pool in top swimming condition.
To discoverhow to fix cloudy pool water from an Arizona monsoon season and the best DIY tips for preparing your swimming pool for these violent acts of nature, keep reading.
5 Tips for Preparing Your Pool for a Monsoon
There are many things the average pool owner can do in Arizona to prepare for a monsoon. Monsoons come with extremely high winds; therefore, it’s always a good idea to think about things that can blow away or nearby items that can enter your swimming pool.
Here are five tips that can help you prepare for the monsoon in Arizona:
1. Remove Pool Deck Furniture
Removing your pool deck furniture or nearby items can prevent damage to your pool and the furniture itself. Keep these items in a storage shed during an Arizona monsoon season for the best results, or tie them down and around a secure post like a tree.
2. Keep Your Plants Trimmed
The professional pool cleaners and pool maintenance in Gilbert, AZ, pH Balanced Pool Service recommend keeping limbs or low-hanging branches trimmed back as one of the best ways to prevent tree limbs and other debris from entering your pool during a monsoon in Arizona.
3. Keep Your Pool Full
A common mistake that many pool owners make is draining their pool water during the Arizona monsoon season. Draining your pool can create a myriad of problems such as damage to pool liners or gouges in concrete retaining walls. It is always better to have debris from a monsoon in Arizona land on top of the water and then clean it.
4. Avoid Using Pool Covers
You might think that by installing your pool cover you can eliminate how to fix cloudy pool water; however, it’s easier to fix cloudy pool water and debris than it is to replace an expensive pool cover during a monsoon in Arizona. For help repairing or replacing damaged pool covers, contact ph Balanced Pool Maintenance in Gilbert, AZ.
5. Remove Floatable Devices
If you want your favorite water float, lounge chair, rainbow airballs, super soaker squirt guns, or even your rubber duckies to stay home during the monsoon in Arizona, it’s a good plan to put them in a safe location such as the pool house, storage shed, garage, or in your basement.
As you can see there are many ways to prevent and prepare your pool for the monsoon in Arizona. Expert pool maintenance in Gilbert, AZ can help you with the preparation and prevention of pools during these Poopdifficult seasons.
Where to Get the Best Pool Maintenance in Gilbert, AZ?
Here at pH Balanced Pool Service, we provide the best pool services in Gilbert, Arizona, and surrounding areas from how to fix cloudy pool water to professional tips that you can do yourself. To get a free estimate click here or call us today and get better prepared for the monsoon season in Arizona.
With yearly temperatures in Gilbert, Arizona keeping things balmy, especially during the summer months, having safe and effective chlorine levels becomes essential for a number of reasons. Unclean pool water can cause a variety of health conditions and damage to your pools.
For homeowners who are unsure, pool maintenance Gilbert, AZ is the best way to keep your pool’s chlorine levels safe at all times. Sunlight, heat, and rainwater runoff can all affect the levels of chlorine in your pool. Therefore, before you dive right in, it’s a good idea to know how clean and safe your water is.
To discover the best tips to check the chlorine level of your pool, keep reading and learn how the best pool cleaners do it like the professionals at pH Balance Pool Service in Gilbert Arizona.
Why pH Balanced Pool Maintenance Gilbert, AZ?
Having pH Balanced pool maintenance Gilbert, AZ is the best way to keep your pool user-friendly and free from bacteria and other infectious diseases. Since pool water is recycled through pumps with chlorine tablets and not a steady supply of fresh drinking water, ensuring that your pH levels are safe becomes paramount.
Sun rays are known to cause damage to the pH levels of chlorine; however, extremely hot days can create more breakdowns. For example, a hot summer day with temperatures over 80 degrees Fahrenheit can produce twice the amount of chlorine in your pool.
Since bacteria love wet and warm environments, it can cause higher chlorine levels. Additionally, water can evaporate up to an inch daily, leaving bacteria exposed along the outer edges of the pool.
Use of the Pool
The reason most people get a pool is to use it and with that comes organic materials and other oils off our bodies that give the chlorine more work to do. The hotter the sun and weather are, the more people use it; therefore, keeping accurate pH levels of your pool water is important.
Pool maintenance companies like pH Balanced Pool Services can schedule a routine pool cleaning and test your pH levels and adjust the amount of chlorine in your pool. This is especially important if your pool is used by a lot of people.
Ultraviolet Rays
Ultraviolet rays (UV) can affect your skin and chlorine levels as well as drop by 90% in just a few hours of the hot Arizona sun. UV rays work on a molecular level and the chlorine in your pool gets released as a gas into the atmosphere. Leaving your chlorine levels to drop off rather quickly.
This can make bacteria, algae, and other organic materials grow in your pool, even if you might think the water is properly chlorinated. For the safest levels of chlorine and pool cleaning, use a ratio of 1 part per million to prevent unwanted microbes.
Other tips to check the chlorine level of your pool include a through inspection in the springtime. Your pH levels should be between 7.2 and 7.6 with your pump running and moving the water without any obstructions in the line or catch filters in the pool.
If you are looking for the best pool cleaners and routine maintenance in Gilbert, Arizona, call pH Balance Pool Services today or click here to fill out our contact form for more information about our yearly maintenance pool cleaning plans.
Although, there may be a few pool maintenance companies in Gilbert, AZ, there’s only one pH Balanced Pool Services.
Let’s face it: you bought a pool to unwind, have fun, and provide hours of entertainment and activities for your family. However, pool ownership sometimes necessitates draining the pool for maintenance. For a variety of reasons, draining your swimming pool may be necessary.
Before emptying your pool, read this article to learn about the reasons for draining and whether or not it is required. Also, before you begin, make sure you know where to drain the pool water. A reliable pool tile cleaning company in Gilbert AZ will help you to do it right.
When is the best time to drain a pool?
Due to these temperature parameters, the ideal time of year to drain a pool is usually in the spring or fall. Spring is a fantastic time to go because the freshwater will be perfect for swimming in the summer. Fall is another option, but most experts advise against leaving your pool empty throughout the winter, so you’ll need to at least partially fill it.
Why You Should Periodically Drain Your Pool
A swimming pool can be drained for a variety of reasons. Make sure you understand why you’re draining your pool because you’ll have to pay more for water when you have to replenish it. The cost of draining your swimming pool may be necessary for some circumstances since the benefits will outweigh the risk of future excessive pool upkeep and repair.
Dry climate
The more water evaporates, and your pool loses water, the hotter and drier the climate becomes. You’ll have to fill your pool with water more frequently if this happens. If you fail to fill your pool and the water level falls too low, the water can become “hard.” The chemical balance of the pool becomes more difficult to maintain as a result of this.
Routine heavy pool cleaning
To give your pool a thorough pool tile cleaning, experts recommend draining it completely every five to seven years. After years of usage, even pool water that has been treated with chemicals regularly can become impossible to clean with chemicals. To correct this, you’ll need to drain and refill your pool to start over. Pool water is exposed to harsh chemicals over time, which can make it more difficult to clean.
Pool repair or painting
A thorough pool drain is required when you need to repair components of your pool. This could be due to a pool crack or unidentified leaks. If your pool is leaking, you may need to empty it to prevent water from leaking into the ground beneath and surrounding your pool.
When NOT to drain your pool
Aside from the numerous reasons to drain your pool, there are a few reasons to refrain from doing so
If you don’t have a place to drain the water
Draining your pool onto the earth surrounding it is never a good idea. The water will soak in the region around your pool and flow to the sides and beneath it. This can lead to pool “floating,” which can result in popping or cracks in the pool’s bottom. This may necessitate pricey repairs.
If you have a fiberglass pool
If you have a fiberglass pool, contact the manufacturer for information relevant to your pool. The walls of a fiberglass pool might bulge out, and the floor can crack when the water is drained. This can frequently result in high repair costs.
How to Drain Your Pool
The groundwater levels should be considered when draining your pool. If the water levels in the area are high enough, your empty pool may pop out of the ground. Furthermore, fiberglass and vinyl liner pools require specific attention because they are not designed to be completely drained. Removing all of the water from these ponds might cause the surface to bend or crack.
The safest option to drain your pool is to utilize a submersible pump once you’ve examined the groundwater situation and the needs of the sort of pool you have. Pool supply companies and hardware stores frequently rent these. While the filter pump can be used to drain a pool, you risk ruining an expensive piece of pool hardware if you do so.
Pool water is usually emptied into your property’s sewage exit. Because sewer pipes are not designed to handle large amounts of water at once, the outflow should be limited to 12 gallons per minute or fewer.
Draining a pool completely using a garden hose can take a day or more. In most situations, it will need to be partially refilled after that, so count on the process taking a couple of days at the very least. BI-WEEKLY POOL SERVICE will relieve you of the worry of draining your pool and provide you with a high-quality, low-cost service.
Risks of Improperly Draining Your Pool
There are a few risks:
The pool can heave out of the ground.
Your pool may be harmed by the sun and exposure.
Your filter pump may be damaged or burned out.
The sewer system might back up into your home.
Conclusion
There are advantages and disadvantages to draining your pool. Make sure you know what you’re doing before draining your pool.
Many times, if your pool is covered by a manufacturer’s guarantee, the manufacturer will not cover repair costs due to your negligence in draining your pool. It’s best to contact your pool manufacturer just to be safe.
Someone, somewhere in Gilbert wants to go for a swim in their pool but they can’t because the water is very cold. They have a pool heater but it’s not doing much to make the situation better because it keeps making strange sounds. This could happen on any day throughout the year, sometimes you just want a warm and peaceful pool session but your pool heater is refusing to cooperate.
This can be very unsettling and annoying. It gets even more annoying when you have no idea what to do to help your situation. In this article, we will be discussing the most common reasons why your pool heater is making strange sounds.
There are several reasons why your pool heater could be making these sounds. Some of them are common and others are not so common. We will be looking into both kinds and also guide you through the process of rectifying each problem.
Reasons why your pool heater makes strange sounds
Clogging This is one of the common reasons. You may have a clogged filter which will result in a poor flow of water for the pool heater. In many cases, this is a major reason for the noise because the pool heater would not ignite due to the low water pressure. To avoid this, ensure that you keep your filters clean by maintaining a periodic cleaning routine with pool equipment repairs Gilbert AZ.
Faulty blower fan
This is not a common reason because not all pool heaters have a blower but it is important to mention it for the sake of those that have one. If your pool heater has a blower, it might have a loose fan which could be the reason your heater is making weird sounds. If this is the situation, it is best to get a professional to look into it, to avoid worse damage.
Faulty pressure switch The pressure switch is responsible for measuring the pressure between your pool pump and the heater system. When the pressure is inadequate, the switch turns off the system. A faulty pressure switch can keep your pool heater from working properly even at the right pressure. If you suspect this might be the cause, you can test it by measuring the voltage across the terminals.
In situations where the switch is the problem, you can bypass it to make use of your pool temporarily. However, it’s not advisable to use this as a long-term solution. Replacing the faulty switch is the best option to avoid unnecessary hitches in the heater’s operation.
Loose ducts
Just like many water systems, the pool heater system has ducts for the inflow and outflow of water. These ducts are fitted at certain points and tend to become loose over time. When they become loose and water keeps flowing through them, they make strange sounds. To correct this, you would need to tighten the ducts and if that does not fix it, get a professional to help.
Accumulated calcium This is quite similar to clogging but the main reason for this is different. When you have hard water in your pool, as a result of the pH levels being off, you begin to have deposits of calcium in your pool. This calcium-concentrated water gets pumped into your heater and some calcium accumulates in it; thereby, clogging the system. This could be the cause of the strange sounds from your pool heater. This can be prevented by monitoring the pH levels of your pool and it can be fixed by getting professionals to help get rid of the calcium deposit.
Conclusion
Why you need frequent pool maintenance? There you have it. Above are some of the reasons you might not be able to enjoy a warm pool either during winter or on any other day of the year. We have discussed the most likely causes and what you can do to fix your pool heater when it starts to make strange noises.
Above all, it is best to get a professional on the scene to carry out a complete check. The professional can detect all the problems and fix them properly before they cause further damage to your pool heater.
People often wonder about the real cost of an Arizona pool. At large, the price for building an inground pool in Arizona can range between $25,000 to $100,000, depending on a range of factors like size, shape, material, etc. However, the most important part of keeping up a swimming pool is weekly pool maintenance.
Owning a pool in Arizona is certainly fun. During hot summer days, you can do nothing else but relax in your own customized pool. Also, you can organize some pool parties to have a blast during weekends. However, pool cleaning in Gilbert by professional services is something that should never be avoided to keep your pool in pristine shape.
Swimming pools are an excellent recreational source and almost a must-have to navigate through rough summer days. However, your entire swimming pool can become dangerous if you neglect pool maintenance and it results in the pool lights not working. The pool lights not only enhance the pool’s aesthetics but also act as a safety feature.
Busted Pool Light Bulb
Generally, there are three different types of algae found in a pool. This includes green algae, black algae, and yellow algae. Green ones are the easiest to get rid of. Simple weekly pool maintenance conducted by professionals can kill such algae. Yellow ones are often found if the climate is humid and it requires brushing the pool to clean them.
Apart from that, there are a few tips that experts leverage to get rid of algae quickly and keep your pool water looking fresh and clean, making it safer for everyone who likes to use it. You should also wash off your rubber duckies and flotation devices with pool cleaning solutions and a garden hose to prevent the spread of algae.
Owning a pool isn’t enough. You need to prioritize pool maintenance by professionals like Gilbert pool service experts to avoid causing more damage to your pool. If left neglected, the small issues can turn into major damage and will cost you thousands of dollars in repairs.
The more water evaporates, and your pool loses water, the hotter and drier the climate becomes. You’ll have to fill your pool with water more frequently if this happens. If you fail to fill your pool and the water level falls too low, the water can become “
The groundwater levels should be considered when draining your pool. If the water levels in the area are high enough, your empty pool may pop out of the ground. Furthermore, fiberglass and vinyl liner pools require specific attention because they are not designed to be completely drained. Removing all of the water from these ponds might cause the surface to bend or crack.
This is one of the common reasons. You may have a clogged filter which will result in a poor flow of water for the pool heater. In many cases, this is a major reason for the noise because the pool heater would not ignite due to the low water pressure. To avoid this, ensure that you keep your filters clean by maintaining a periodic cleaning routine with 
The pressure switch is responsible for measuring the pressure between your pool pump and the heater system. When the pressure is inadequate, the switch turns off the system. A faulty pressure switch can keep your pool heater from working properly even at the right pressure. If you suspect this might be the cause, you can test it by measuring the voltage across the terminals.
This is quite similar to clogging but the main reason for this is different. When you have hard water in your pool, as a result of the pH levels being off, you begin to have deposits of calcium in your pool. This 
