Pool toys are an essential item to any backyard swimming pool, especially when there’s children involved. They make playing adult swimming pool games such as basketball and volleyball fun and keep your children entertained for hours. The downside, pool toys can accumulate with grime, mold, and mildew over time if not properly cleaned and disinfected on a regular basis.
Below are four useful tips from pool service Gilbert companies on how to keep your pool toys clean and safe for use:
Tip #1: Disinfecting & Sanitizing Your Toys
Top start with, for proper disinfection and cleaning, you should be using the right cleaning tools. While chlorinating a swimming pool kills most germs and bacteria, your pool toys can still become covered in algae. Although chlorine can sanitize your toys, they still need to be dried to prevent mold and mildew from forming.
Tip #2: Removing Mold and Mildew
To remove mold and mildew from your pool toys, you can use a diluted bleach solution. This solution should be mixed with two cups of bleach for every gallon of water. Spray it all over your toys and scrub vigorously with a soft-bristle brush to remove lingering grime and debris. Then, rinse your toys down with a garden hose and dry them off with a towel before putting them away.
Tip #3: Natural Home Cleaning Solutions
If you’re not fond of harsh chemicals, you can definitely use more natural remedies such as a baking soda solution or white vinegar solution. For white vinegar, use a ratio of 1-part vinegar to 2-parts water. If you want to try a baking soda solution, use a ratio of 1/4 cup baking soda to one quart of water. Rinse and repeat the same steps as mentioned above.
Tip #4: Storing Your Pool Toys
One common mistake besides pool equipment cleaning that many pool toy owners make is storing their toys improperly. This is the primary reasons why reason mold and mildew form on pool toys. Once you’re done using the toys,place them in the proper place to dry. Mold and mildew thrives in damp, dark places; therefore, when you don’t dry your pool toys properly, they are at risk of developing a number of infectious bacterias. Instead, store your toys in a dry, airy location, and make sure to dry them thoroughly before storage.
The Quality of Your Pool Toys Could be Affected by the State of Your Pool
If you want to make playtime as safe as it possibly can be? Your pool toys might be getting indirectly affected by the state of your pool instead of improper cleaning. If you have ever experienced a slimy feeling on a porous noodle toy? That could be caused either by having a non-chlorinated pool or by having a pool with a skewed PH balance that doesn’t let chlorine work effectively.
An ideal pool PH balance should be from 7.2 – 7.8 or slightly alkaline. Any higher, and your chlorine stops working as it should and any lower, your pool tiles will start to corrode. You can try to manually balance PH levels by adding stabilizers to your pool. However, a better option would be to hire a professional pool cleaner.
Why Should You Hire Professional Pool Cleaners?
Professionals such as pH Balanced Pool services can keep your pool pristine by ensuring that the PH levels are always perfectly balanced. Additionally, we provide tile cleaning, filter cleaning, and general pool repairs. You’ll never have to worry about the condition of your pool or your pool toys ever again when you choose the best swimming pool service in Arizona.
Swimming is fun. It’s also healthy and refreshing. If you own a pool, then these benefits come to you almost whenever you feel like dipping your feet, half, or entire body inside the water. Maintaining your pool temperature at desired and recommended levels is important to keep enjoying your time with it.
Different groups of people may be using your swimming pool. It could be family, friends, or even you. Each individual may also have unique preferences and be equipped or skilled differently. The comfort of your pool will determine how well it serves each individual who uses it.
Perfect Temperature
Your swimming pool could have varied temperature ranges, for various reasons, and to serve different people who may use it. Eighty-five degrees Fahrenheit is, however, what most people will find perfect as it is comfortable and most suitable to swim in. Why don’t we look at the different temperature ranges and what it can mean to your pool service in Gilbert?
A Lukewarm Dip
You’ll find the temperature between 77 and 82 degrees Fahrenheit to be neither too cold nor too warm. It could work for you with either preference. Should anyone from your household desire a lukewarm dip, then this could be their ideal temperature. A dive may do better at 79 degrees, as it is slightly cool and will make your breathing more comfortable.
Cold Swimming
There are more benefits to a cool pool, which you may enjoy at a lower range of between 70 and 80 degrees. Besides easier breathing, you may find it accommodative to deeper breaths and a faster heartbeat. Generally, swimming is smooth at this range, but you should always watch that the temperature doesn’t drop below 70 degrees, as that could cause some inconsistencies with your heartbeat.
Warming
While a cold pool comes with perks, it wouldn’t be ideal for kids or anyone learning to swim. This group will find a pool temperature of between 86 and 88 degrees Fahrenheit to be most desirable.
A warm pool will need you to watch a few things, however. A swimming pool at 86 to 88 degrees Fahrenheit should have an air temperature of at most 84 degrees around it. A warm pool will also have a high cooling rate and is susceptible to the growth of algae. Generally, you’ll find it costlier to maintain and keep your pool clean.
Conclusion
Your preference takes the day! What kind of pool do you desire? What is your interest in it? A better question would be, who is going to use it? With all this in mind, you’ll be able to determine what temperature to set for your swimming pool.
It’s also important to consider your pool’s pH level when cleaning it. The pH level means its acidity or alkalinity. A more acidic swimming pool can leave your eyes and skin feeling itchy, and the latter, dry. A high acidity level can also cause corrosion to some pool elements. A more alkaline pool, on the other hand, is susceptible to bacteria and germs. Keeping your pool pH balanced will help prevent this while promoting safe and comfortable swimming.
Owning a swimming pool can be a massive pleasure. Despite that, it can also be quite time-consuming and difficult. It’s something that calls for a lot of commitment and a weekly pool service. If you want to keep your swimming pool in tiptop condition all year long, then you should steer clear of any and all of these typical and frustrating pitfalls, period.
Concentrating Solely on High Temperatures
It isn’t unheard of for swimming pool owners to concentrate exclusively on service in times of high outdoor temperatures. Remember, it’s critical to stay on top of your swimming pool regardless of the time of the year. It needs service when it’s hot outdoors. It needs service at other times all the same. Maintenance isn’t just something that’s necessary at the start of the summer season. It’s something that’s necessary in the autumn and spring as well. You should hire a technician to assess your pool for any indications of winter destruction. Professionals assess pools for liner tearing, pipe harm and similar things. Pool winterization can come in handy during the autumn season each year. Swimming pool concealing can safeguard things in times of inclement temperatures. If you want to maintain your pool without any worries, then you need to prioritize maintenance regardless of the specific season.
Failing to Assess Chemistry on a Frequent Basis
Swimming pool owners often fail to assess chemistry on a frequent basis. It can be wise to access chemistry two times weekly during the hotter summer months. It can be wise to assess it weekly during the winter months as well. If you do this, then you can go forward with subtle tweaks that involve water chemistry.
Utilizing Chemicals That Just Do Not Make Any Sense
It’s crucial for swimming pool owners to stay far away from the error of utilizing chemicals that just aren’t appropriate. Swimming pool owners often treat water with the assistance of chemicals that eliminate all traces of algae and bacteria. Remember, though, that swimming pools are always different. They all call for their own chemical combinations. If you present a pool with a problematic blend, then you may end up having to pay the price. If your swimming pool water has a chemical balance that’s just not correct, then it may lead to severe mouth, skin and eye irritation in users. Questionable chemical balances can bring on pool material degradation that can pave the way for persistent leaks as well.
Ignoring Filter Cleaning Responsibilities
Monthly filter cleaning sessions are essential. People should be equipped with a couple of filters at all times. Swapping out pool filters tends to be a hassle-free and swift task that people can take on independently with more pool tips.
Contact the pH Balanced Pool Service, LLC Crew
Do you want to take excellent care of your swimming pool in the picturesque Gilbert, Arizona area? Contact the pH Balanced Pool Service team to set up an appointment for professional pool cleaning service without any delay.
Having fun in your backyard pool is one of the best parts about owning a home. However, these pools can quickly become unclean as debris begins to clutter. Let’s take a look at whether weekly pool service is necessary.
Pool maintenance
It depends on the type of maintenance in question. More serious forms of maintenance only need to be done every month or even every year. Light maintenance can take place every week. Other factors include the size, shape, and depth of your pool.
Skimming
Skimming is a very basic form of pool maintenance. Skimming the surface of water clears out debris and any foreign objects in your pool. This should be done once or twice per week. While it might not seem harmful to let debris accumulate in the pool, it severely decreases the quality of the water. Anybody who wants to go for a swim will face a serious health hazard. In addition, it’s simply disgusting to have a layer of leaves and insects covering the surface of the water. Skim frequently for the sheer sake of showing off your pool.
Automatic pool cleaners
Automatic pool cleaners seem like a dream – robots that move around the pool and collect any foreign objects. However, these pool cleaners aren’t as efficient as they may seem. The robots can easily get stuck on a wall or crack, rendering them unable to move and in need of rescue. If this happens while you are away from your home, the cleaning will fail without you noticing. Even if the automatic cleaner is doing its job, it can’t clean up larger pieces of debris or give your pool a super thorough cleaning. Automatic cleaners are good for casual green to clean pool maintenance, but for more serious jobs, you’ll definitely want to turn to a more effective method.
Clean tiles
Cleaning the tiles of your pool is very important. While this isn’t maintenance in the traditional sense, clean tiles reduce the chance of slipping or falling. Cleanliness also prevents mildew or mold from forming, both of which can lead to long term damage. It’s best to clean the tiles of your pool at least once per month. This means both the inside and outside of the pool. In general, it’s not a bad idea to use a variety of soaps and cleansers to maintain your pool. If you can mitigate damage before it happens, you won’t have to remodel or renovate your pool in the worst-case scenario. Weekly pool maintenance such as this is largely dependent on how often you use the pool. If your kids are constantly making splashes, and you enjoy laying on your floatation devices as well, your pool will need extra attention.
Bottom of a pool
The bottom of a pool is often the most important place for maintenance. Because it is subject to the highest water pressure, it is prone to cracks and other faults. If the foundation of your pool is shaky, the rest of it will surely have issues in the future. Although it might not be necessary to perform full maintenance every week, it’s a good idea to at least check the bottom of your pool for any anomalies. As mentioned before, detecting these faults is crucial when it comes to pool maintenance. This will give you ample time to take the necessary actions and bring your pool back into perfect shape. As you might imagine, diving to the bottom of your pool is a difficult task, and often best left to professionals.
Conclusion
Weekly pool maintenance is advised in some shape or form. A resource such as PH Balanced Pool can clean your pool for you. The team’s professional experience will save you a lot of time and stress. Using the best technologies, your pool will be cleaner than ever and ready for use in the summertime. Because pool cleaning supplies can often be expensive on their own, this is also a good idea from a financial standpoint. PH Balanced Pool covers everything from scheduled to intermittent pool maintenance.
Having a pool is a great pastime. It allows you to host friends and family over for memorable parties and get-togethers. Yet owning a pool means you’re going to have to take care of it. A lot. One problem that pool owners may notice is stains. Depending on what kind of stain it is, it may be easily removed or it may require help from the swimming pool service Gilbert AZ professionals. Here’s a helpful guide to pool stains and how to remove them.
What Kind of Stain is it?
The first step that should be taken in removing pool stains is determining what kind of stain it is. There are three main types of pool stains: Organic, metal, and rust.
Organic stains come from organic materials. This might be from a build-up of algae in your pool. It could also come from leaves and grass that have flown into the pool from an outside source. It may even be due to berries and other flowers that have drifted into the water. The organic material should be cleaned out of your pool frequently.
Metal stains typically come from the water source. The water may contain iron, copper, or manganese. Depending on the metal, the stain may be different colors. These metals can also be introduced to the pool via fertilizer sprays that drift into the pool or yard sprays. When spraying your yard with either, it’s good practice to cover your pool to prevent contamination. It’s also possible that swimmers may have some chemicals on their feet when they walk across the yard to the pool. You may want to implement a sandal rule where swimmers must wear sandals when outside of the pool.
Rust stains can be particularly unpleasant to look at in your pool. They can come from a metallic object that falls into the water and remains there. An example might be a hairpin that fell out of a swimmer’s hair and landed on the bottom of the pool. Over time, the hairpin starts to rust and turns a nasty brownish-red color in the entire area. Rust stains can also come from the rebar. In this instance, it’s best that a professional Gilbert pool service cleans the issue since it may require construction.
One final stain that you may notice is waterline stains. These can come from many different sources. Oil and lotions that are on a swimmer’s skin can cause the stains. As can powerful chlorine tablets. Finally, swimmers who have a tendency to relieve themselves in the pool can also create a stain along the waterline.
Removal Practices
After you have determined what kind of stain it is, you stand a better chance of removing it effectively. One method is to shock it. This method requires you to know the pH of your pool. It should have a pH between 7.0-7.2. Begin by reducing the pH and the alkaline levels.
Then add a few pounds of calcium hypochlorite to the water. The general rule of thumb is to add a bag to every five gallons of water. After a few hours have passed, you can sprinkle some more chlorine granules into the stain directly. Using a brush, scrub the stain until it is removed. You can then return the pool back to its preferred alkalinity by adding sodium bicarbonate into the water.
Another option is to buy an enzyme that can eat away organic material stains. You simply add the enzyme to the water per the manufacturer’s description.
For stains that stem from metallic sources, like metal in the water, you can clean all you want. However, until the source of water is altered, you will continue to see stains. The best option in this regard is to include a filter that can remove the metals before the water is poured into the pool. Then you can clean it using the method described above.
Rust stains can also be prevented by ensuring that no one swims in the pool with metal.
Choose a Professional Cleaner
For the best chance of having a clean and safe pool, you should just hire Ph Balanced Pool. They’ll take care of your pool and its pH levels, so you can just enjoy a beautiful pool.
Your pool sees a lot of action in the summer. If you want to keep your pool open and ready for all of the parties you have planned, then you need to take care of it. Here are a few ways that you can keep your pool clean during the summer.
Understand Pool Chemistry
Unfortunately, cleaning your pool isn’t as simple as just tossing in some chlorine tablets whenever you want. To keep it absolutely clean, you have to understand how pool chemistry works. Unless you have a kit at home that can test the chemicals in your pool as well as its pH, this is best suited for the pool service professionals.
You can simply take a sample of your pool’s water and send it to a professional pool cleaning company. They can go over the sample and tell you what you should add to your pool over time.
It’s good to know that the pH of your pool’s water should be around 7. This is because anything higher than that will make chlorine treatments less effective.
Clean Out Filter
Your pool filter is going to do a lot of work in keeping your pool clean. However, it also needs to be cleaned out now and then. You can do this by easily removing the filter and cleaning it with a brush and hose. In some cases, it may be a good idea to toss out the old filter and put in a new one.
You’ll want to clean your filter after thunderstorms and when there’s a lot of pollen in the air. Your filter can become choked due to all of the debris clogging its system.
Check Water Level
It’s also important that the water level stays at an optimal height. If the water level is too low, then it won’t be able to reach the filter and skimmer. Keep the pool filled to just above the filter to ensure water can easily pass through it.
Inspect the Ozonator
To keep chlorine levels in your pool at a good amount, you need to ensure that your Ozonator is working properly. First, check to see if the light is on. If not, then you’re going to need professional Gilbert pool companies to repair it. If it is, then feel free to clean out any debris that might be blocking it. Ozonators help reduce chlorine waste. It’s important to keep them operating efficiently to stop your pool from becoming too chlorinated.
Maintain Chlorine Generator
Those who have salt pools have to be especially mindful of their chlorine generator. Because they’re using salt to help keep their pool water clean, it also interferes with the chlorine generator. Regularly check your water’s pH to ensure that it stays around 7. In most cases, you’ll find that you can actually taste the salt in the water. This isn’t good. Reduce the amount of salt that is being placed inside of the pool to keep your chlorine generator healthy and efficient.
Clean Out Bottom Drains
Even though you may not be using your drain for a while yet, you still need to keep it clean. Bottom drains can start to collect algae if they’re not regularly cleaned. That algae can then start to expand across the pool and turn it green if you don’t quickly clean and chlorinate the water.
Hire a Professional
The best way to keep your pool absolutely clean this summer is to hire Ph Balanced Pool. Sit back and relax while they test your pool and correct its pH for you. With their service, you can simply enjoy the pool and not worry.
There’s nothing that compares to having a swimming pool in your backyard. It makes for a true vacation at home. Your swimming pool offers a place to relax, unwind, and enjoy time with family and friends. By adding value to your home with such an exceptional backyard addition, this sort of investment requires proper care and maintenance to ensure its lasting potential and family fun.
To properly care for your pool, you will want to remember there are more extensive pool repairs, like pool resurfacing, that are required. In addition to regular Gilbert pool service maintenance, pool resurfacing helps to preserve the lifespan of your pool.
So, how often should a pool be resurfaced? What are the signs you can look for to help determine when this job needs to be done?
Well, your pool’s surface should be smooth and clean. With this in mind, you want to be sure to resurface your pool when needed. To determine how often your pool needs to be resurfaced will depend upon when it was installed and with what material it was made. Cement and plaster, for example, usually require resurfacing every three to seven years. Whereas more durable material can last as long as fifteen years before such a job is required.
There are also signs you can look for to determine if you should resurface your pool sooner than later.
For one, a worn-down surface will feel rough on the skin. This can be hazardous to swimmers causing scrapes and other discomforts. Plus, as the surface of your pool wears away it looses its beautiful appearance and becomes harder to clean because dirt and debris cling easier to the roughness of a worn-out pool surface. There are other signs you can also look for to determine how close your pool is to needing resurfacing, like mineral stains from iron and copper in your pool’s water and structuring, like plaster, beginning to chip off.
If you are having trouble deciding if it is time to resurface your pool, contact the original installer or professional to inspect your pool’s surface structure. Pool owners may not realize that this is a very important maintenance project, but the longer you wait to resurface your pool once signs arrive, increases the likelihood of cracks and leaks in your pool’s structure, which can lead to lasting damage and very expensive repairs.
Before having your pool resurfaced, there are a few things to keep in mind, though. Because resurfacing a pool is a timely process, be sure to plan to have this service done before pool season and after the winter weather, so that enough time is permitted for this project to be completed in time for summer. If you are more of a DIYer, it is good to know that resurfacing your pool is a hefty project that should be done by a professional.
Enjoying your pool for summers to come is of utmost importance.
At pH Balanced Pool Service we are committed to offering the highest level of quality service and peace of mind. As a small, family-owned business we promise to offer our customers stress-free service with our one-stop-shop for all your pool and spa needs! From tile cleaning, filter replacements, lighting, and extensive repairs, pH Balanced Pool Service is here to help you preserve your pool for years to come!
Swimming pools make perfect options for people who want to be able to get exercise. They can also make amazing additions to outdoor properties of all kinds. If you want to take complete advantage of your swimming pool, however, you have to make sure that its water is as fresh and clean as can be at all times. People don’t want to swim in water that’s dark, soiled and murky, after all. People don’t want to look at filthy water at all, either. If you want to maintain the swimming pool’s water that’s attractive and clear as can be, these suggestions can all go a long way for you. Green pool water isn’t exactly enticing or healthy to anyone.
Concentrate on Swimming Pool Filtration
If your swimming pool water is less than transparent, then filtration issues could be to blame. Grab your swimming pool filter. Cleanse and rinse it in a meticulous manner. Don’t fret if you rely on a cartridge filter, either. Simply clean the associated cartridge in a cautious way. It’s critical to promote a high degree of circulation within your swimming pool no matter what. People who rely on timers should utilize them for a minimum of between eight and 12 full hours daily.
Put a Lot of Time Into Swimming Pool Chemicals
It’s crucial to assess the water of your swimming pool on a routine basis. It’s crucial to do so before you leave your home for getaways or anything else along those lines. You don’t have to panic if you’re going to be gone for an extended span of time, either. If that’s the case, then you should ask a trusted pal or a specialized swimming pool service to handle your pool upkeep duties temporarily. It can also help you greatly to go for the installation of an automatic chlorinator. People who aren’t at home need to have chlorinators that release more chlorine than usual. If you want to keep your pool chemicals in check, you need to assess chlorine, calcium and alkanity with great frequency.
Think About Icky Gunk
Icky gunk can interfere greatly with the wellness of your swimming pool. You should do everything in your capacity to do away with dirt and leaves that may be hanging out inside of your pool. Vacuuming can do a lot for people who are having difficulties with the removal of miscellaneous items inside of pools. Leaves that are deteriorating contain a lot of acid. That’s how they are capable of reducing amounts of chlorine. If you don’t want anything interfering with pH or alkalinity matters, then you need to take charge of any random things that may be floating around in your precious pool, period.
Consider Metals
Metals can be an issue for people who own swimming pools and who want to keep them in fine working order. You should go above and beyond to assess your swimming pool. If you believe that it has any metals, then you need to take tangible action. It can be beneficial to introduce a device that can do away with metal. Remnants of copper and iron are seen inside of standard tap H20. Metals can be detrimental to pools as well. That’s because they can make them look green in coloration. It can be a hassle to eliminate this coloration, too.
It can be frustrating to notice issues with the appearance of the water in your pool. If you observe anything out of the ordinary, then it can help you considerably to recruit professional assistance. Professionals who concentrate on swimming pool matters know so much about alkalinity, pH amounts, circulation, filtering practices, chlorine drops and algae dilemmas galore. If you have any frustrations that relate to the cleanliness or general state of your swimming pool in or around Gilbert in Arizona, then we can help you out right here at pH Balanced Pool Service, LLC on South Gilbert Street. We’re a company that accommodates customers who have all sorts of swimming pool upkeep and care requests. If you’re searching for professionals who can clean your pool water, call us. If you’re trying to find professionals who can fix issues that involve your pool overall, call us, too.
People all know that swimming pools can make fantastic additions to all kinds of outdoor spaces. There are some misconceptions that are commonly associated with pools, however. If you’re considering swimming pool ownership, then it can help you greatly to learn about them all. It can help you significantly to find out about all of the things about pools that are actually based in pure reality, too.
Swimming Pools and Illnesses
Some people mistakenly believe that going inside of a swimming pool cannot lead to the development of illnesses. That isn’t true, sadly. Swimming inside of pools for the most part is in no way, shape or form hazardous. Water that’s tarnished and contaminated, though, can do a number on human wellness. If you breathe in this type of H20, it can pose an issue. If you consume it accidentally, it can pose an issue, too. Being around impure water in general can lead to the transmission of disease.
Don’t ever assume that transparent water that’s inside of swimming pools is necessarily fresh. That’s because there may be microorganisms inside of it that you simply cannot see with your own eyes. It’s critical to never disregard the need for routine and exhaustive swimming pool cleaning sessions by pH Balanced Pool no matter what.
There are all sorts of germs that can bring on illnesses in people. Don’t assume that chlorine has the ability to instantly eradicate these kinds of germs. Chlorine is a chemical that’s typically utilized for swimming pool cleaning applications. It can indeed do away with germs that lead to sicknesses, but it operates in a gradual manner. It doesn’t lead to instantaneous results in any sense. It does away with the majority of germs rapidly. Note that there are various germs that can linger for several days at a time. Cryptosporidium is one such example.
Eye redness is a big issue for some people who spend time inside of swimming pools. Don’t make the assumption that red eyes are linked to significant water chlorine amounts. If your skin starts to itch, then the water in your pool may have immoderate chloramine. It may have a pH that’s questionable as well. These situations can lead to incessant itchiness. They can lead to the development of conspicuously red eyes all the same. If you want to do away with immoderate chloramine, then extra chlorine may do the trick, interestingly enough. Chlorine has the ability to make pool water hygienic.
Some people believe that intense chemical scents translate to fresh water inside of swimming pools. Don’t assume that intense chemical scents are related to chlorine. These smells are linked to chloramines that aren’t conducive to wellness. They’re linked to chloramines have developed due to the merging of contaminants and chlorine. Chloramines aren’t able to cleanse pool water as well. If you keep your swimming pool in tiptop shape, it shouldn’t have much of a smell at all.
Bathing is crucial for people who plan on going inside of swimming pools. If you want to safeguard a swimming pool that’s fresh and inviting, you should go in the shower before ever getting inside. You should encourage other people to do the same exact thing if at all possible. People carry urine, oils and sweat. If they don’t bathe, they may bring those substances inside of pool water.
Parents should take cautious approaches to allowing their little ones to go inside of swimming pools. If a youngster is sporting a diaper, it may lead to water contamination. That’s because unpleasant situations can always pop up. A child may urinate while in the water with his or her diaper intact. Parents should bathe their kids meticulously before allowing them to go inside of pools. They should assess their diapers in advance as well. Their diapers should be immaculate. They shouldn’t be loose at all, either. Swimming diapers are not invulnerable to possible leakages that can harm pool water.
People shouldn’t think that swimming pool supervisors and lifeguards are the ones who have to clean pools. People should all try to be accountable regarding swimming pool use.
Call pH Balanced Pool to make an appointment for an exhaustive and effective pool cleaning session.
Using swimming pool heaters in the winter is a fantastic way to keep your pool active regardless of the time of year. Additionally, your pool heater should keep your swimming pool system functioning properly throughout the winter. It will prevent pipes from becoming too cold and eventually bursting.
When it comes to selecting what type of pool heater you would want, there are plenty of options. Solar pool heaters work well in Arizona due to the immense amount of sunshine we experience on a weekly basis. While the installation of solar panels can be expensive, the costs afterwards are dramatically decreased as there is no charge for using sunlight. Solar heaters are the most popular method used by our Gilbert pool maintenance and repair company.
Another option is gas pool heaters. Being very energy efficient, these pool heaters always provide a quality product. Gas pool heaters also warm up your pool at a considerably faster rate than solar pool heaters. Electric pool heaters are another choice, although while they are a quality product, they tend to be more expensive than their counterparts. This is due to the fact that you will see a rise in your energy bill, depending on how often you utilize the heater.
Similar to electric pool heaters, propane pool heaters are another expensive option. They are great to use if you are not using your pool that often, otherwise operation costs will rise drastically if you use your pool frequently. Propane heaters do heat your pool up at a faster rate than electric or solar heaters though.
Swimming pool heaters do serve the purpose of keeping your pool comfortable enough to swim in regardless of how cold it is outside. Make sure to do proper research when choosing a pool heater, as individual circumstances may dictate which pool heater will work best for you. Definitely make sure to consider whether or not a seller is willing to do the installation themselves, or if that is something that will need to be done separately.
After considering all of the following, you should be able to feel confident is purchasing the best pool heater for you. If you need help with installation, make sure to call your local Gilbert pool maintenance and repair company to do the job the right way, the first time.
Top start with, for proper disinfection and cleaning, you should be using the right cleaning tools. While chlorinating a swimming pool kills most germs and bacteria, your pool toys can still become covered in algae. Although chlorine can sanitize your toys, they still need to be dried to prevent mold and mildew from forming.
One common mistake besides 
Your swimming pool could have varied temperature ranges, for various reasons, and to serve different people who may use it. Eighty-five degrees Fahrenheit is, however, what most people will find perfect as it is comfortable and most suitable to swim in. Why don’t we look at the different temperature ranges and what it can mean to your 
While a cold pool comes with perks, it wouldn’t be ideal for kids or anyone learning to swim. This group will find a pool temperature of between 86 and 88 degrees Fahrenheit to be most desirable.
It isn’t unheard of for swimming pool owners to concentrate exclusively on service in times of high outdoor temperatures. Remember, it’s critical to stay on top of your swimming pool regardless of the time of the year. It needs service when it’s hot outdoors. It needs service at other times all the same. Maintenance isn’t just something that’s necessary at the start of the summer season. It’s something that’s necessary in the autumn and spring as well. You should hire a technician to assess your pool for any indications of winter destruction. Professionals assess pools for liner tearing, pipe harm and similar things. Pool winterization can come in handy during the autumn season each year. Swimming pool concealing can safeguard things in times of inclement temperatures. If you want to maintain your pool without any worries, then you need to prioritize maintenance regardless of the specific season.
It’s crucial for swimming pool owners to stay far away from the error of utilizing chemicals that just aren’t appropriate. Swimming pool owners often treat water with the assistance of chemicals that eliminate all traces of algae and bacteria. Remember, though, that swimming pools are always different. They all call for their own chemical combinations. If you present a pool with a problematic blend, then you may end up having to pay the price. If your swimming pool water has a chemical balance that’s just not correct, then it may lead to severe mouth, skin and eye irritation in users. 
Automatic pool cleaners seem like a dream – robots that move around the pool and collect any foreign objects. However, these pool cleaners aren’t as efficient as they may seem. The robots can easily get stuck on a wall or crack, rendering them unable to move and in need of rescue. If this happens while you are away from your home, the cleaning will fail without you noticing. Even if the automatic cleaner is doing its job, it can’t clean up larger pieces of debris or give your pool a super thorough cleaning. Automatic cleaners are good for casual 
The bottom of a pool is often the most important place for maintenance. Because it is subject to the highest 
The first step that should be taken in removing pool stains is determining what kind of stain it is. There are three main types of pool stains: Organic, metal, and rust.
After you have determined what kind of stain it is, you stand a better chance of removing it effectively. One method is to shock it. This method requires you to know the pH of your pool. 
Unfortunately, cleaning your pool isn’t as simple as just tossing in some chlorine tablets whenever you want. To keep it absolutely clean, you have to understand how pool chemistry works. Unless you have a kit at home that can test the chemicals in your pool as well as its pH, this is best suited for the 
To keep chlorine levels in your pool at a good amount, you need to ensure that your Ozonator is working properly. First, check to see if the light is on. If not, then you’re going to need professional 
Even though you may not be using your drain for a while yet, you still need to keep it clean. Bottom drains can start to collect algae if they’re not regularly cleaned. That algae can then start to expand across the pool and turn it green if you don’t quickly clean and chlorinate the water.
For one, a worn-down surface will feel rough on the skin. This can be hazardous to swimmers causing scrapes and other discomforts. Plus, as the surface of your pool wears away it looses its beautiful appearance and becomes harder to clean because dirt and debris cling easier to the roughness of a worn-out pool surface. There are other signs you can also look for to determine how close your pool is to needing resurfacing, like mineral stains from iron and copper in your pool’s water and structuring, like plaster, beginning to chip off.
It’s crucial to assess the water of your swimming pool on a routine basis. It’s crucial to do so before you leave your home for getaways or anything else along those lines. You don’t have to panic if you’re going to be gone for an extended span of time, either. If that’s the case, then you should ask a trusted pal or a specialized 
Metals can be an issue for people who own swimming pools and who want to keep them in fine working order. You should go above and beyond to assess your swimming pool. If you believe that it has any metals, then you need to take tangible action. It can be beneficial to introduce a device that can do away with metal. Remnants of copper and iron are seen inside of standard tap H20. Metals can be detrimental to pools as well. That’s because they can make them look green in coloration. It can be a hassle to eliminate this coloration, too.
Some people mistakenly believe that going inside of a swimming pool cannot lead to the development of illnesses. That isn’t true, sadly. Swimming inside of pools for the most part is in no way, shape or form hazardous. Water that’s tarnished and contaminated, though, can do a number on human wellness. If you breathe in this type of H20, it can pose an issue. If you consume it accidentally, it can pose an issue, too. Being around impure water in general can lead to the transmission of disease.
Parents should take cautious approaches to allowing their little ones to go inside of swimming pools. If a youngster is sporting a diaper, it may lead to water contamination. That’s because unpleasant situations can always pop up. A child may urinate while in the water with his or her diaper intact. Parents should bathe their kids meticulously before allowing them to go inside of pools. They should assess their diapers in advance as well. Their diapers should be immaculate. They shouldn’t be loose at all, either. Swimming diapers are not invulnerable to possible leakages that can 
When it comes to selecting what type of pool heater you would want, there are plenty of options. Solar pool heaters work well in Arizona due to the immense amount of sunshine we experience on a weekly basis. While the installation of solar panels can be expensive, the costs afterwards are dramatically decreased as there is no charge for using sunlight. Solar heaters are the most popular method used by our 
Swimming pool heaters do serve the purpose of 
